
Introduction / General safety advice for electrical power tools
QTechnical Data
Waxer / polisher
PARKSIDE XQ90-KH3013
Rated voltage: | |
Rated power: | 90 W |
n0 = | |
Polishing disc: | ø 250 mm |
Protection class: | II / & |
Noise and vibration data:
Values determined in accordance with EN 60745. The sound pressure level
Wear ear protection!
Evaluated acceleration, typical: Hand / arm vibration ah = 2,6 m / s2 Uncertainty K = 1,5 m / s2
Warning! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibra- tion levels and in many cases they may exceed the values given in these instructions. It is easy to under- estimate the vibration load if the electrical power tool is used regularly in particular circumstances.
Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working.
XQ90
Kompernaß GmbH · 44867 Bochum · Germany
www.kompernass.com
General safety advice for electrical power tools
Warning! Read all the safety advice and instructions!
Failure to observe the safety advice and instructions may result in electric shock, fire and/ or serious injury.
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!
1. Workplace safety
a)Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents.
b)Do not work with the device in potentially explosive en- vironments in which there are
inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes.
c)Keep children and other people away while you are operating the electrical tool.
Distractions can cause you to lose control of the device.
GB/IE/CY
7