General safety advice for electrical power tools
b)Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired.
c)Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This pre- caution is intended to prevent you from uninten- tionally starting the device.
d)When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not fa- miliar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people.
e)Look after the device carefully. Check that moving parts are working prop- erly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have dam- aged parts repaired before you use the device. Many accidents have their ori- gins in poorly maintained electrical power tools.
f)Keep cutting tools clean and sharp. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
g)Use the electrical power tool, acces- sories, inserted tools etc. in accord- ance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations.
Safety advice for waxer / polishers
Avoiding the danger of injury, fire and damage to your health:
JAlways pull the plug out of the mains socket before cleaning or maintaining the device.
JEnsure that the bonnet is well secured to the buffing plate.
JDo not touch any rotating parts!
Before switching on check to ensure that the buffing plate is not blocked and can start up without problem.
JCheck to ensure that the bonnet and the buffing plate are complete and undamaged. Immediately exchange torn or damaged bonnets / buffing plates.
JWait until the polishing disc is flat on the surface to be polished before switching on the waxer / polisher.
JDo not use any abrasives; these can destroy the paint finish.
QOriginal ancillaries / accessories
JUse only the ancillaries and accessories that are detailed in the operating instructions. The use of parts other than those recommended in the operating instructions, or other accessories, can put you at risk of injury.
QUnderstood everything?
JWhen you have become familiar with these general safety instruction for electrical appliances, and, with the help of the appropriate operating instructions, know all about the functions and handling of your electrical appliance, then you can start working with it. You will work at your safest only with careful attention to all of the declarations and instructions of the manufacturer.
GB/IE/CY 9
