Konexx MOBILE KONNECTOR manual Switch settings, At&T, Isdn

If you set the Level switch too high, you will hear feedback such as a buzz or loud squeal through the modem speaker when your modem is off-hook. If you hear feedback, set the Level switch to the next lower setting - using the sequence 2, 3, 1, 4 - until the feedback disappears.

For example, if the Level switch is set to 2 and you hear feedback, set it to 3. If you still hear feedback, set it to 1. If feedback continues, set it to 4.

Switch settings

The Mobile Konnector enables your modem to communicate through your phone system with specific level settings. The settings are adjustable to four different levels depending on the model of phone you are connecting to.

Table 3-1 shows the Level switch settings to use for various telephone models. If the telephone you want to use does not appear in Table 3-1, set the level as described in the previous section. If feedback occurs for all four levels, contact Technical Support and they will assist you in determining the correct setting for your compatible phone.

A “Yes” in the “Auto-dial” column indicates that autodialing is supported with that telephone model. The number in the “SEE NOTE” column refers to a note at the end of the table.

Table 3-1. Telephone Level

Switch Settings

MANUFACTURER	MODEL	SWITCH	AUTO-	SEE
		SETTING	DIAL	NOTE
Ameritech	None	1	Yes	1
	Specified
AT&T	Definity	3	Yes
	Destiny	3	---	2
	Dimension	2 or 3	---	2
	G2	4	Yes
	Horizon	2	Yes
	ISDN	3	No	1
	Infinity	3	Yes
	Legend	3	No
AT&T	Merlin	3	Yes
(continued)
	Merlin II	3	---	2
	Partner	3	Yes
	Spirit	3	Yes	1
	System 25	3	Yes	3 & 4
	System 75	3	Yes	3 & 4
	System 85	3	Yes	3 & 4
Comdial	Digitech	3	Yes
	Executech	3	Yes
	Impact	3	Yes