SETTINGS
ADJUSTING DATE AND TIME
Changing the date
Select MENU > SETTINGS > TIME DATE > DATE (2,4,1).
Change the flashing figures for the year using the arrow buttons or by entering the figures on the keypad. Press OK to confirm and to continue to the month, and then proceed in the same way for the day.
Changing the time
Select MENU > SETTINGS > TIME DATE > TIME (2,4,2).
Change the flashing figures for the hour using the arrow buttons or by entering the figures on the keypad. Press OK to confirm and to continue to minutes.
Changing the time format
Select MENU > SETTINGS > TIME DATE > TIME FORMAT (2,4,4).
Select either a
ADJUSTING RING LEVEL VOLUME
Select MENU > SETTINGS > RING LEVEL (2,5).
Select your choice and press OK to confirm.
There are six volume levels plus a silent mode. You will hear the ring tone for each level you select. If you select silent mode, an LED on the phone flashes when an incoming call is received.
ADJUSTING FLASH/R-PULSE DURATION
The R pulse/Flash (Register recall) is used to request a new line from the PBX. Different countries and PBXs may require different durations for activating the pulse. Duration requirements should be specified in the technical data for the PBXs.
Select MENU > SETTINGS > FLASH (2,6).
Select your choice and press OK to confirm. Applicable settings:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA
28
