Connecting the probe | Konica Minolta 300 manual

4Pass the other end of the band outward through band ﬁ xture B.

◆Take care not to twist the band.

5Fold back and secure the band with the hook- and-loop tape section.

◆When attaching the instrument to an arm, adjust the band length and fitting at this hook- and-loop tape section.

2)Connecting the probe

Connect the probeʼs connector plug into the Probe Connector on the instrument.

◆ M a k e s u r e t h a t p r o b e ʼ s connector plug is oriented correctly.

◆Do not connect it in with excessive force. Doing so may damage the connector.

◆Do not touch the connector terminals by hand. Contact failure may occur.

Band ﬁ xture B Preparations

*Connecting the extension cable EC-300 between the PULSOX-300 and the probe extends the probe cable to a total length of 1m.

Extension Cable EC-300 (1m)