EMC Guidance

Guidance and manufacture’s declaration - electromagnetic emissions

The Oxygen Saturation Monitor Model PULSOX-300 is intended for use in the electromagnetic environment speciﬁed below. The customer or the user of the Model PULSOX-300 should assure that it is used in such anenvironment.

	Emissions test	Compliance
	RF emissions
	CISPR 11	Group 1
	RF emissions	Class B
	CISPR 11	Class B
	CISPR 11
	Harmonic emissions	Not applicable
	IEC61000-3-2	Not applicable
	IEC61000-3-2
	Voltage ﬂuctuations/
	ﬂicker emissions	Not applicable
	IEC61000-3-3

Electriomagnetic environment - guidance

The Model PULSOX-300 uses RF energy only for its internal function. Therefore its RF emissions are very low and are not likely to cause any interference in nearby electromagnetic equipment.

The Model PULSOX-300 is suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes.

Guidance and manufacture’s declaration - electromagnetic immunity

Appendix

Immunity test	IEC 60601	Compliance	Electromagnetic environment -
	Test level	level	guidance
Electromagnetic	±6 kV contact	±6 kV contact	Floors should be wood, concrete or
Discharge (ESD)	±8 kV air	±8 kV air	ceramic tile, if ﬂlors are covered with
IEC61000-4-2			synthetic materisl, the relative humidity
IEC61000-4-2			should be at least 30%.
			should be at least 30%.
Electrical fast	Not applicable
Transient/burst
IEC61000-4-4
Surge	Not applicable
IEC61000-4-5
Voltage dips, short	Not applicable
Interruptions and
Voltage variations
on power supply
Input lines
IEC61000-4-11
Power frequency	3 A/m	3 A/m	Power frequency magnetic ﬁelds
(50/60Hz) magnetic			should be at level characteristic of a
ﬁeld			typical location in a typical commercial
IEC61000-4-8			or hospital environment.
IEC61000-4-8

Konica Minolta 300 instruction manual EMC Guidance

Models: 300

EMC Guidance

Appendix