Konica Minolta 360 To Access the MFP, Built-inStamp and Set Numbering Stamp Size, Application

bizhub 500/420/360 Copy Job Shops

To Access the MFP

1.Touch Input

2.Enter the password (“x”)

3.Touch OK

4.Touch the Access hard key

Built-in Stamp and Set Numbering Stamp Size

APPLICATION:

The stamp size of built-in stamps and Set Numbering can now be change. This enhances the versatility of the existing functionality of built-in stamp and Set Numbering.

In this exercise; 1st produce an output sample of the standard Built-in Stamp and Set Numbering Stamp size. Then utilize the following procedure for changing the size of the Built-in Stamp and Set Numbering Stamp and compare the out put with

the standard functionality.

1.Touch Application

2.Touch Stamp/Overlay

3.Touch Built-in-Stamp

4.Touch Change Size , OK

5.Touch Set Numbering

6.Touch Change Size , OK , Start

8