bizhub 500/420/360 Copy Job Shops
Finding the Copier IP Address on the bizhub 500/420/360
It will be necessary to have access to the copier IP address when either configuring the 500/420/360 onto a network or setting up a “one touch”.
1.Press Utility/Counter on control panel.
2.Administrator Setting
3.Enter administrator password: 12345678 , OK
4.Network Setting
5.TCP/IP setting
The copier IP address will appear on the control panel display.
Create an 8.5" x 14" Set
Stapled on left hand corner
Place two 8.5" x 14" originals face up; feet 1st into the RADF
1.Finishing
2.Corner , OK
3.Combine Originals & Original Direction
4.Index the last original graphic on right side of display panel , OK
5.Press start key
Create an 8.5"x 11"–1:2 Set
Stapled on left corner & reduced by 78.5%
Place eight 8.5" x 11", 1:1 originals face up in the RADF.
1.Simplex/Duplex
2.1:2 , OK
3.Finishing
4.Corner , OK
5.Zoom , Reduce/0.785 , OK
6.Press start key
1
