bizhub C203/C253/C353 2-35
Setup items by operation 2
2.9.5 POP before SMTP
POP before SMTP
1In Administrator mode of PageScope Web Connection, select the Network tab.
2Select "E-mail Setting".
3Select "E-mail TX (SMTP)".
4Specify the following settings.
!
Detail
If the POP server is different from the SMTP server, the POP server informs the SMTP server that it has
been logged in. Therefore, if the set POP before SMTP time is too short, messages may not be sent.
E-mail RX (POP)
1In Administrator mode of PageScope Web Connection, select the Network tab.
2Select "E-mail Setting".
3Select "E-mail RX (POP)".
Item Definition Prior confirmation
POP before SMTP To perform POP before SMTP, select "ON". Whether the sever requires POP before
SMTP authentication