CHANGING THE COMPACTFLASH CARD - DATA-TRANSFER MODE

Never remove a memory card when the access lamp is red - the data or memory card may permanently be damaged.

Windows 98 and 98 Second Edition

1.Turn off the camera.

2.Change the CompactFlash card.

3.Turn the mode dial to the data-transfer position to remake the USB connection.

Windows ME, 2000 professional, and XP

1.Stop the USB connection using the unplug-or-eject-hardware routine (p. 100).

2.Turn off the camera.

3.Change the CompactFlash card.

4.Turn the mode dial to the data-transfer position to remake the USB connection.

Macintosh

1.Stop the USB connection by dragging the drive icon into the trash (p. 101).

2.Turn off the camera.

3.Change the CompactFlash card.

4.Turn the mode dial to the data-transfer position to remake the USB connection.

AUTO POWER SAVE - DATA-TRANSFER MODE

If the camera does not receive a read or write command within ten minutes, it will shut down to save power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the computer monitor. Click “OK.” Neither the camera or computer will be damaged in this operation.

Turn off the camera with the mode dial. Remake the USB connection by turning the mode dial back to the data-transfer position.

102 DATA-TRANSFER MODE