ProblemSymptomCause

Solution

“000” is displayed on the frame counter.

Shutter will not release.

No-card warning appears on the monitors.

CompactFlash card is full and unable to store an image at the image-quality or image-size setting on the camera.

No CompactFlash card in the camera.

Subject is too close.

Insert a new CompactFlash card (p. 18), delete some images (p. 76), or change the image-quality or image-size setting (p. 44).

Insert a CompactFlash card (p.18).

Make sure the subject is within the autofocus range (p. 26) or use the macro mode (p. 28).

Pictures are not sharp.

Focus signal is red.

The camera is in macro mode.

A special situation is preventing the autofocus system from focusing (p.27)

Cancel the macro mode setting (p. 28).

Use the focus-lock function to focus on an object at the same distance as the subject (p. 26) or use manual focus (p. 59).

Pictures are

Slow shutter speeds

Use a tripod, change the cam-

taken indoors

result in blurred images

era sensitivity to a higher set-

or in low-light

when the camera is hand-

ting (p. 62), or use the flash (p.

situations with-

held.

30).

out flash.

 

 

Continuous

Change the image-quality set-

advance does The image quality is set to TIFF.

ting (p. 44).

not work.

 

104 APPENDIX