Konica Minolta DiMAGE S414 FOCUS LOCK, FOCUS RANGE, 0.5m, 0.9m, CCD plane, - ∞ (3ft - ∞), - ∞ (1.6ft - ∞), Macro mode (p. 28), Wide-anglelens position, Telephoto lens position

FOCUS LOCK

The focus-lock function is used when the subject is off-center and outside the focus frame. Focus lock may also be used when a special focusing situation prevents the camera from focusing on the subject. This function is controlled with the shutter-release button.

Place the subject within the focus frame. Press and hold the shutter-release button partway down.

• The focus signals will indicate that the focus is locked. The shutter speed and aperture value will change from white to black indicating the exposure is locked.

• When the focus is set, an AF sensor will briefly appear on the live image to indicate the point of focus.

Without lifting your finger from the shutter-release button, recompose the subject within the image area. Press the shutter-release button all the way down to take the picture.

FOCUS RANGE

Wide-angle lens position	0.5m	- ∞ (1.6ft - ∞)	CCD plane
Telephoto lens position	0.9m	- ∞ (3ft - ∞)
Macro mode (p. 28)	0.16m - 0.6m (0.5ft - 2ft)

All distances are measured from the CCD.

26 AUTO-RECORDING MODE -BASICOPERATION