INSTANT PLAYBACK

After an image is captured, it can be displayed on the monitor before being saved. An index display is used with the continuous-advance or bracketing drive modes (p. 32). When used with voice memo, the audio recording begins after the image is played back.

Instant playback is activated with a menu; see navigating the auto-recording mode menu section on page 42. Instant playback is also set in the custom 2 section of the multi-function recording menu (p.

54). There are three menu settings:
Off2sec 10 sec
Instant playback is disabled.

The captured image will be displayed for two or ten seconds. While dis- played, the image can be deleted before being saved.

To store an image during playback.

If the center of the controller is pressed during the instant playback, the displayed image will immediately be saved and the playback canceled.

Auto

: delete : store

To delete an image.

To delete an image during the instant playback, press the QV/delete button(1). A confirmation screen will appear.

Delete this frame?

Yes No

Use the left/right keys of the controller to highlight “YES.” “NO” will cancel the operation.

Press the controller to delete the image.

1

49