GETTING UP AND RUNNING
Setting the date and time
After initially inserting a memory card and charging the battery, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of recording. Depending on the region, the menu language may also have to be set. To change the language, refer to page 69.
| Basic | Setup 1 Setup 2 | |
|
|
| |
| LCD brightness | - | |
|
|
|
|
| Power off |
| 3 min. |
|
|
| |
| Audio signals | On | |
|
|
| |
| Date/Time set | - | |
Press the menu button to active the playback menu.
Use the right key to highlight the setup 1 tab at the top of the menu.
1
4
Turn the camera on by pressing the main switch near the
Slide the mode switch to the playback position (2).
Date format YYYY/MM/DD
Playback menu: setup 1 section
Use the zoom lever to highlight the
Press the right key. “Enter” will appear on the right side of the menu.
2 
The date and time can be set on the playback menu. Navigating the menu is simple. The menu button (3) turns the menu on and off. The zoom lever and left and right keys (4) control the cursor and change settings on the menu. The enter button (5) selects menu options and sets adjustments.
Date/Time set
Enter
Date/Time setting screen
Press the enter button to display the date/time
setting screen.
Use the left and right keys to select the item to be changed. Use the zoom lever to adjust the item.
Press the enter button to set the clock and cal-
endar. The playback menu will be displayed.
Press the menu button to close the playback
35
menu.
18 | 19 |