PLAYBACK MODE
Formatting memory cards
When a memory card is formatted, all data on the card is erased.
The formatting function is used to erase all data on a memory card. Before formatting a card, copy the data to a computer or storage device. Locking images will not protect them from being deleted when the card is formatted. Always format the memory card using the camera; never use a computer to format a card.
When the format option is selected and entered, a confirmation screen will appear. Choosing “Yes” will format the card, choosing “No” will cancel the formatting operation. A screen will appear to indicate the card has been formatted.
If the
Video output
Camera images can be displayed on a television (p. 71). The video output can be changed between NTSC and PAL. North America uses the NTSC standard and Europe uses the PAL standard. Check which standard is used in your region to play back images on your television set.
70
Viewing images on a television
It is possible to view camera images on your television. The camera has a
1.Turn off the television and the camera.
2.Insert the AV cable into the camera’s
3. Plug the other end of the AV cable into the video and audio input terminals on the television.
•The yellow plug is for the video output. The white plug is for the monaural audio output.
4.Turn the television on.
5. Set the television to the video channel. | 2 |
6. Turn the camera on and slide the mode switch to the playback position.
•The camera’s monitors will not activate when the camera is attached to a television. The playback- mode display will be visible on the television screen.
7. View images as described in the |
|
playback section. | 3 |
• Use the television controls to adjust the |
|
volume of the audio playback. |
|
| 71 |