
RECORDING MODE
Focus lock
The
Focus signals
This digital camera has a quick, accurate autofocusing system. The focus icon in the lower right corner of the LCD monitor and the indicator lamp next to the viewfinder indicate the focus status. The shutter can be released regardless if the camera can focus on the subject or not.
Focus range
Place the subject within the monitor focus frame or center the subject in the viewfinder. Press and hold the
• The focus signal on the monitor and the viewfinder indicator lamp will indicate if the focus is locked.
Without lifting your finger from the
Focus confirmed - the LCD monitor focus signal is white and the viewfinder indicator lamp is green and steady.
Cannot focus - the LCD monitor focus signal is red and the viewfinder indicator lamp is green and blinking quickly. When the AF system cannot focus, the focus is set to 20m (65.6ft) or 2m (6.5ft) when using the flash.
Focus signal
Special focusing situations
The camera may not be able to focus in certain situations. In these situations the
The focus range is 25cm (0.8ft.) to infinity. Both the LCD monitor and viewfinder can be used to frame the subject. However, because of parallax, only the monitor’s live image will be accurate with subjects closer than 1m (3ft.) at the zoom lens’
24
The subject is too dark. The subject in the | Two subjects at differ- | The subject is near a |
focus frame is low in | ent distances overlap | very bright object or |
contrast. | in the focus frame. | area. |
25