Insignia 42"/46" LED-LCD TV, 120Hz 1080p

ProblemSolutionPicture

Problem

Buttons on the front of the TV do not work

Solution

• Make sure that the Button Lock option is

set to Off. See “Locking control buttons”

No picture

Good sound but poor color

Poor picture

Horizontal dotted line

“Ghost” or double image

Snowy picture or noise

VGA picture is not stable or synchronized

After images appear

Picture has a few bright or dark spots

•Make sure that the Audio Only option is set to Off. See “Playing TV audio only” on page 20.

•Make sure that the video cables are connected securely to the back of your TV. See “Making connections” on page 10.

•Adjust the contrast and brightness. See “Adjusting the TV picture” on page 16.

•Make sure that the correct video mode is selected. See “Selecting the video input source” on page 14.

•Make sure that the incoming signal is compatible.

•Make sure the antenna is connected correctly. See “Connecting an antenna or cable TV (no box)” on page 10.

•Check the closed caption settings. Some TEXT modes can block the screen. See “Selecting the closed captioning mode” on page 27.

•Adjust the contrast, color, and brightness settings. See “Adjusting the TV picture” on page 16.

•Make sure that the room is not too bright. Light reflecting off the screen can make the picture difficult to see.

•If an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor. Turn off one or more devices.

•Your TV may be too close to another electrical device, such as a hair dryer or neon light. Turn off the device or move your TV.

•Obstructions, such as a high-rise building or hills, may be preventing your antenna from receiving a clear signal. Using a highly directional antenna may improve the picture quality.

•Make sure that the AV and antenna cables are connected securely.

•Make sure that you have selected the correct VGA mode on your computer.

•Do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty.

•A few bright or dark dots on an LCD screen is normal. It does not affect the operation of this TV.

INlink does not work

on page 24.

• Unplug the power cord, wait a few

seconds, then plug the cord back in and

turn on your TV.

• Make sure that the device you want to

control is HDMI CEC-compatible.

• Make sure that the HDMI device’s power

cord is connected correctly.

• Make sure that the INlink Control option is

set to On in the INlink menu. See “Using

INlink” on page 32.

• Scan for INlink devices again. See “Using

INlink” on page 32.

• Connect an INlink device using an

HDMI 1.3 cable.

• If it the HDMI cable is disconnected then

reconnected or if the power is turned off

scan for INlink devices again. See “Using

INlink” on page 32.

Audio

Good picture but no sound

No output from one of the speakers

•Increase the volume.

•Make sure that the sound is not muted.

•Make sure that the correct audio mode is selected. See “Adjusting sound settings” on page 19.

•Adjust the balance in the Audio menu. See “Adjusting sound settings” on page 19.

Other

www.insigniaproducts.com

39