Connect the camera to the printer using the camera’s USB cable. The larger plug on the cable is connected to the printer. Open the card chamber door and insert the smaller plug of the cable into the camera. Turn the camera on; the USB Direct Print screen is displayed automatically.

Number of prints in the print run.

Strike through indicates unprintable file type.

Number of copies of the displayed image.

Use the left/right keys of the controller to display the image to be printed.

Press the up key to select the number of copies to be printed. To deselect an image for printing, press the down key until the number of copies reaches zero.

:move

:sel.

:print

Repeat the previous steps until all the images

 

 

 

The information (i+) button switches

to be printed are selected. Press the central

button of the controller to begin the printing

between the single frame and index play-

routine.

back formats.

 

 

 

Print file?

Number of prints: 7

Yes No

Printing finished.

OK

The number of prints in the print run are displayed on the LCD monitor. Use the left/right keys to highlight “Yes,” and press the center of the controller to start printing.

Once printing begins, the operation can be canceled by pressing the center of the controller. The printing-finished message indicates the end of the operation; turn the camera off to end the routine.

103