Connecting the camera to a computer

Confirm the battery has sufficient power before connecting the camera to a computer; the full-battery indicator should be displayed on the monitor. The use of the AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98 or 98 Second Edition, read the section on page 95 on how to install the necessary USB driver before connecting the camera to a com- puter.

1. Start up the computer. The computer must be on before connect-

 

ing the camera.

 

2. Insert the memory card into the camera. To change the memory

 

card while the camera is connected to a computer, see page 102.

 

3. Slide open the card chamber door. Attach the smaller plug of the

 

USB cable to the camera. Make sure the plug is firmly attached.

3

4. Attach the other end of the USB cable to the computer’s USB port.

Make sure the plug is firmly attached. The camera should be con-

 

nected directly to the computer’s USB port. Attaching the camera

4

to a USB hub may prevent proper operation.

 

 

5. Press the main switch to turn on the camera. The USB connection

 

is made automatically; a screen appears to indicate the operation.

 

The monitor turns off when the connection has been made. If the

 

USB connection is not made, disconnect the camera and restart

 

the computer. Repeat the connection procedure above.

Initializing USB connection.

94DATA-TRANSFER MODE