Custom White Balance
Custom white-balance allows the camera to be calibrated to a specific lighting condition. The setting can be used repeatedly until reset. Custom white balance is especially useful with mixed-lighting or when critical control over color is needed. The object used to make a calibration must be neutral. A blank piece of white paper is an ideal surface and can easily be carried in a camera bag.
To calibrate the camera, select custom setup (Cust.set) from the white balance option in section 1 of the movie, and P, A, S, and M exposure-mode menus (p. 44); the custom white-balance calibration screen opens.
Fill the image area with a white object; the object does not need to be in focus. Press the central button of the controller to make the calibration or press the menu button to cancel the routine.
The live view shows the effect of the new white balance setting. The custom setting will remain in effect until another calibration is made or the white-balance setting is changed.
| | | | |
Drive mode | | |
Image size | Cust.set | |
Quality | CustRecall | |
White balance | Auto | |
Key func. | | |
Preset | |
| | | | |
| | | | |
| | | | |
:enter
If the custom white-balance setting is required again, select custom recall from the white-balance option of the menu; the last custom white-balance setting will be applied to the camera. The same custom white-balance setting is made and accessed from the movie, P, A, S, and M exposure modes.
| | |
Drive mode | | |
Image size | | |
Cust.set | |
Quality | CustRecall | |
White balance | Auto | |
Key func. | | |
Preset | |
| | |
