Focus signal

When the shutter-release button is pressed partway down, an audio signal confirms the AF system has focused. The focus sig- nals can be changed or turned off in section 3 of the setup menu (p. 86). Two tones are available.

Reset default

Audio signals

1

Focus signal

1

Shutter FX

1

Volume

2

Shutter FX

When the shutter is released, a shutter sound effect gives a positive confirmation a still image is recorded. The sound effect can be turn off in section 3 of the setup menu (p. 86). Two shutter effects are available. Signal 1 is taken from the Dynax/Maxxum 9 SLR and signal 2 is taken from the leg- endary Minolta CLE, a compact rangefinder that represents the pinnacle of the development of the Leitz-Minolta CL.

Volume

The volume of the audio signals and shutter FX can be increased or decreased in section 3 of the setup menu (p. 86). The volume can be turned off. This affects the camera’s audio signals only and will not change the playback levels of a movie clip.

Video output

Camera images can be displayed on a television (p. 84). The video output can be changed between NTSC and PAL in section 4 of the setup menu. North America uses the NTSC standard and Europe uses the PAL standard. Check which standard is used in your region to play back images on your television set.

Video output

NTSC

Transfer mode

Data storage

Self-timer

10 sec.

Anti-shake

Disp. + Exp.

94Setup menu

Page 94
Image 94
Konica Minolta Z3 instruction manual Focus signal, Shutter FX, Volume, Video output