Setting the date and time
Set date/time?
Yes No
Date/Time set
2004 . 01 . 01
00 : 00
MM / DD / YYYY
:move 
:sel. 
:enter
Date/Time setup screen
After initially inserting a memory card and batteries, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of recording.
1If the clock and calendar have not been set, a message is displayed for a few seconds each time the camera is turned
on. This message is also displayed if the clock and calen- dar reset when the camera is stored without batteries for a long period.
Use the left and right keys of the controller (1) to select “Yes.” “No” cancels the operation.
Press the center of the controller to open the date/time setup screen.
Use the left and right keys to select the item to be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and calen- dar.
The date/time setup screen can be opened in section 2 of the setup menu.
18
Getting up and running 
