Konica Minolta Z3 instruction manual Basic recording operation

Basic recording operation

The example uses auto recording. Except for movie recording, the operation for other exposure modes is the same. Automatic Digital Subject Program Selection is only available in the auto recording mode.

Place the subject anywhere within the focus frame. Make sure the subject is within the focus range of the lens (p. 24). For very close subjects, use the macro function (p. 35).

Press the shutter-release button partway down to lock the focus and exposure. An AF sensor (a) is displayed to indicate the subject. Automatic Digital Subject Selection will choose the appropriate exposure mode, see the facing page.

				The focus signal (b) on the monitor will confirm focus lock. If the
				focus signal is red, the camera was unable to locate the subject.
				Repeat the previous steps until the signal is white. The shutter
	a		b	speed (c) and aperture (d) appears and turns black to indicate the
				exposure is locked.
c		d

Press the shutter-release button all the way down to take the pic- ture.

The access lamp lights indicating image data is being written to the memory card. Never remove a memory card while data is being transferred.

Camera notes

The recorded image can be previewed by continuing to hold down the shutter-release button after the image is captured. The instant-playback function can also be used (p. 88).

22Basicrecording