Program P7: EG 1-4 7-1: EG 1 (Filter)
275
Program P7: EG 1-4
The STR-1 has four assignable EGs, in addition to the
Amp EG. Each of these can be used as an AMS
modulation source to control a wide variety of
parameters.
There are also two parameters with dedicated EG
modulation inputs: Frequency for Filters A and B. Any
of the four EGs can be used for these modulation
routings.
In the midst of all this flexibility, we thought it would
also be good to provide a little structure. With this in
mind, EG 1 is named EG 1 (Filter), and EG2 is named
EG 2 (Pitch).
Please take these names as suggestions, rather than
restrictions. If you like, you’re free to use these
envelopes to control any EG or AMS destination, or to
use other EGs to control Filter Frequency or Pitch.
7-1: EG 1 (Filter)
7-2: EG 2 (Pitch)
7-3: EG 3
7-4: EG 4
The STR-1’s EGs 1-4 are identical to the AL-1’s EG1.
For detailed explanations, please see “7–1: EG 1
(Filter),” on page 199.
Program P8: LFO 1-4
The STR-1 has four assignable LFOs, in addition to the
EXi Program’s Common LFO. Each of these can be
used as an AMS modulation source to control a wide
variety of parameters.
8-1: LFO 1
8-2: LFO 2
8-3: LFO 3
8-4: LFO 4
The STR-1’s LFOs 1–4 are identical to those of the AL-
1. For detailed explanations, please see “8–2: LFO 1,”
on page 205.