Sequencer mode
422
Audio Input 1…4, Audio Input 1/2 and 3/4: Choose these to record directly from analog inputs 1-4. The input signal will be recorded directly, without passing through any buses or effects, and without being affected by the audio input mixer settings. For more information, see the diagram “REC Source = Audio Input 1, 2,” below.If Stereo Pair is on, inputs 1 and/or 3 are sent to odd-numbered tracks, and inputs 2 and/or 4 are sent to even-numbered tracks.
Level Pan
Insert
Effects
CLIP !
Insert
Effects
L/R
Bus REC
1,2,3,4
...
Indiv.
1,2,3,4,5,6,7,8
Sequencer Playback
Keyboard
Level Pan
Insert
Effects
Audio Input 1
Audio Input 2

REC Source = Audio Input 1

(Single Track REC)

Recording
Bus = L/R or IFX1-12
Bus = L/R or IFX1-12
Insert
Effects
Level
Pan
HDR Track (Mono)
Audio Track selected in
Track Select
REC Source
Audio Input1
L/MONO
R
AUDIO OUTPUT
HEADPHONES
[x] Source Direct Solo
Total
Effects
Master
Effects
Monitor
Level Pan
Insert
Effects
CLIP !
L/MONO
R
AUDIO OUTPUT
HEADPHONES
Insert
Effects
L/R
Bus
...
Sequencer Playback
Keyboard
Level Pan
Insert
Effects
Audio Input 1
Audio Input 2

REC Source = Audio Input 1, 2

(Multi REC)

[x] Source Direct Solo
Total
Effects
Master
Effects
Recording (Multi REC On)
Monitor
Bus = L/R or IFX1-12
Bus = L/R or IFX1-12
Insert
Effects
Level
Pan
HDR Track (Mono)
HDR Track (Mono)
REC
1,2,3,4 Indiv.
1,2,3,4,5,6,7,8
Audio Input1
Audio Input2
REC Source
Audio Track selected in
Track Select