Korg Electronic Keyboard Examples of the effect graphics

Examples of the effect graphics Individual Outputs

759

Examples of the effect graphics

Here are some examples of the effects that display

graphics. 012: Stereo Graphic EQ

Parametric EQ/EQ

Parametric EQ/EQ is used in 011: Stereo Parametric

4EQ, 013: Stereo Master 3EQ, 027: OD/Hi-Gain Wah,

030: Guitar Amp Model+P4EQ, and the “P4EQ” and

“OD/Hi Gain” of Mono-Mono Serial and

Mono//Mono Parallel effects #109 and following.

Red lines show the center frequencies of each band.

Vertical axis: Gain (dB)

Horizontal axis:

Frequency (Hz)

Purple area: This shows the frequency response

after passing through all of the bands.

These sliders adjust the

gain (dB) of each band.

The selected band

is indicated by a

thick red line.

Green line: Shows

the frequency response

of the selected band

alone, without the results

of the other bands.

This line shows the center

frequencies of the selected Type.

The cutoff frequencies specified for bands 1, 2, 3, and 4 are shown by red lines.

Vertical axis: Gain (dB)

Horizontal axis: Cutoff frequency (Hz)

The currently selected band

is shown by a thick red line.

Purple line:

• This indicates the frequency

response after passing

through bands 1, 2, 3, and 4.

• The Trim setting is not shown.

Contents

Main Page iii Contents : AL-1 Analog Synthesizer . . . . . .171 . . . . . . . . . . . . . . 155 Program mode: EX Program mode: HD-1 . . . . . . . . . . . . . . 1 iv : MS-20EX . . . . . . . . . . . . . . . . . .281 : CX-3 Tonewheel Organ. . . . . . . 213 : STR-1 Plucked String. . . . . . . . . .235 v Sequencer mode. . . . . . . . . . . . . . . . 411 Combination mode . . . . . . . . . . . . . .321 : PolysixEX. . . . . . . . . . . . . . . . . . 307 vi Sampling mode. . . . . . . . . . . . . . . . .563 Global mode. . . . . . . . . . . . . . . . . . .641 vii Global P5: Drum Kit . . . . . . . . . . . . . . . . . . . 673 Disk mode . . . . . . . . . . . . . . . . . . . .691 Disk P0: File . . . . . . . . . . . . . . . . . . . . . . . . . 693 Disk P1: Audio CD. . . . . . . . . . . . . . . . . . . . . 698 viii Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 829 Reverb and Early Reflections. . . . . . . . . . . . . .849 Mono-Mono Serial. . . . . . . . . . . . . . . . . . . . .854 Mono/Mono Parallel. . . . . . . . . . . . . . . . . . . 877 ix KARMA GE guide . . . . . . . . . . . . . . .893 About the KARMA GE guide . . . . . . . . . . . . . 893 About KARMA . . . . . . . . . . . . . . . . . . . . . . . 895 GE (Generated Effect) Group . . . . . . . . . . . . . 897 x Appendices . . . . . . . . . . . . . . . . . . . . . . . . . .960 Appendices. . . . . . . . . . . . . . . . . . . 965 Alternate Modulation Sources (AMS). . . . . . . .965 Dynamic Modulation Sources (Dmod) . . . . . . .976 Program mode: HD-1 HD-1 Overview + OSC1 OSC2 Program P0: Play Auto Song Setup 01a: Program Select Banks GM, g(19), and g(d): General MIDI Program P0: Play 01: Main Program Bank Contents Changing the Bank Type for USER-AG Program Select [(0127 (INT and USER Banks), Bank/Program Select Category [0018, Name] Category/Program Select Program P0: Play 01: Main 5 OSC1 OSC1 Multisample/Wave Sequence/Drum Kit MS14, Velocity Zone Graphic OSC1 LFO1, OSC1 LFO2 Graphic Voice Assign Mode Pitch EG Graphic Common LFO Graphic 3Band EQ Graphic IFX 7 06a: Program Select, Load GE Options, KARMA T.Sig, Tempo Bank Type [(HD-1, EXi)] Program [(0127 (INT and USER Banks), KARMA T.Sig (Time Signature) [GE/TS, 1/416/4, 1/816/8, 1/1616/16] 8 Module A KARMA Module Info Chord Name KARMA Value 9 06c: RealTime Controls KARMA SWITCH1 KARMA SWITCH1 Stored Value KARMA SWITCH1 Name 10 07a: Program Select 07b: Controller View Use Global setting [Off, On] PLAY/MUTE [Play, Mute] SOLO On/Off Avoiding extraneous noise ADC OVERLOAD! Recording Level [Inf, 72.0+0.0+18.0] CLIP! Setting levels Tips for eliminating distortion when using the analog inputs Source Bus [L/R, REC1/2 & 3/4, Audio Input1/2 & 3/4, S/P DIF L/R, Indiv.1/27/8] Source Bus = REC Bus 1/2 Source Bus = Audio Input 1/2 Source Bus = Indiv. 1/2 Source Bus = S/P DIF L/R Source Bus = REC Bus 1/2 Trigger [Sampling START SW, Note On] Metronome Precount [Off, 4, 8, 3, 6] Save to [RAM, DISK] Mode (Sampling Mode) [L-Mono, R-Mono, Stereo] Bus (Output) Select [L/R, L, R, 18] Level [000127] Page 19 09a: Program Select & Tempo 09b: OSC 1/2 20 EQ TRIM [0099] LOW EQ [18.00+18.00dB] MID FREQ [100Hz10.00kHz] MID GAIN [18.00+18.00dB] 21 Solo switch and Select switches 12 OSC1 Select/Solo [Off, On] OSC2 Select/Solo [Off, On] MIX VOLUMES Sliders 12 Other Audio Input settings 23 Select/Solo (16) [Off, On] Sliders 16 24 Switch Off/On (116) [Off, On] 09e: RT/KARMA (Real Time Knobs/KARMA) 25 Control [SW18, SL18] Module and Parameter [A 0132, P 0108] Knob 58 [000127] KARMA SCENES 18 26 09f: Tone Adjust Tone Adjust and MIDI SysEx Interaction between Tone Adjust and MIDI CCs Absolute, Relative, and Meta parameters Page 28 Common Tone Adjust Parameters 29 HD-1 Tone Adjust Parameters Macro parameters Per-Oscillator parameters Page 31 Default Tone Adjust Settings 32 Program P1: Basic/Vector 11: Program Basic 11a: Program Name and Tempo Program Name [000127/001128: Name] 11b: Oscillator Mode Oscillator Mode [Single, Double, Drums] 33 11c: Voice Assign Mode Voice Assign Mode [Poly, Mono] Poly Poly Legato [Off, On] 34 Chord [Off, Bsc, Adv] Source Pad [1...8] Unison Unison [On, Off] 35 Thickness [Off,0109] 11d: Key Zone Setting Key Zones from the keyboard Osc 1 Bottom [C1G9] 36 Swing uses the Wave Sequences Resolution setting Key Sync [On, Off] Quantize Trigger [On, Off] How Quantize Trigger works Key (Scale Key) [CB] 15: Vector Control What does Vector mean? Vector Joystick and Vector Envelope Program P1: Basic/Vector 15: Vector Control 39 Vector Volume Control and CC Control 15a: Vector Volume Control Equal Power [Off, On] OSC1 Center Volume [0, 25, 50, 75, 100%] 40 OSC2 Center Volume [0, 25, 50, 75, 100%] 15b: Vector CC Control Program P1: Basic/Vector 15: Vector Control 41 15c: Vector Graphic Show Point [Vector Joystick, Vector Envelope Point 04] Oscillator Volume & CC Display 42 16: Vector Envelope 16a: Basic Program P1: Basic/Vector 16: Vector Envelope 43 16b: Vector Envelope Loop 16c: Vector Envelope Page Program P1: Basic/Vector 18: Set Up Controllers 45 18b: Modulation Knob Assign 46 Assigning notes to the pads 19a: Pads Notes 18 [Off, C1G9 / 001127] Program P1: Basic/Vector 19: Set Up Pads 47 Pads 28 48 Program P2: OSC/Pitch 21: OSC1 Basic 21a: OSC1 Frequency Frequency Offset [10.0 Hz +10Hz] 21b: Note-On Control 49 Mode [Key, Key + Damper] 21c: OSC1 Multisample/Wave Sequence Multisamples, Wave Sequences, and Drum Kits Velocity splits, crossfades, and layers Multisample ROM/EXs Mono/Stereo Select menu Multisample RAM Mono, RAM Stereo Select menu Wave Sequence Select menu Program P2: OSC/Pitch 21: OSC1 Basic Xfade Range [Off, 1127] Curve [Linear, Power, Layer] 52 MS2 (Mid Hi), MS3 (Mid Lo), and MS4 (Low) 21d: OSC 1 Velocity Zone Top [001127] Bottom [001127] 22: OSC1 Pitch 22a: Pitch Pitch Slope [1.0+2.0] 54 Ribbon [12+12] JS (+X) [60+12] JS (X) [60+12] AMS (Pitch) [List of AMS Sources] 55 LFO1 Intensity [12.00+12.00] JS+Y Intensity (LFO1 JS+Y Int.) [12.00+12.00] LFO2 22d: Portamento 25: OSC2 Basic 26: OSC2 Pitch 29: Pitch EG Differences from the other EGs Pitch EG is also an AMS source 57 29a: EG Reset AMS (EG Reset AMS) [List of AMS Sources] 29b: Envelope Break [99+99] 58 Different curve settings for up and down 29c: Level Modulation AMS2 Program P2: OSC/Pitch 29: Pitch EG 59 29d: Time Modulation 29: Page Menu Commands 60 Program P3: Filter 31: Filter1 31a: Filter Routing Program P3: Filter 31: Filter1 61 31b: Filter A Low Pass, High Pass, Band Pass, Band Reject 62 AMS (Resonance) [List of AMS Sources] AMS (Output Level) [List of AMS Sources] 31c: Filter B Program P3: Filter 32: Filter1 Modulation 32: Filter1 Modulation 32a: Keyboard Track 64 Entering notes from the keyboard Program P3: Filter 32: Filter1 Modulation 65 +Inf and Inf ramps Key Follow Filter Keyboard Track is also an AMS source 32b: Filter EG 66 AMS (Filter EG) [List of AMS Sources] 32c: Filter A/B Modulation Intensity (AMS1) [99+99] Intensity (AMS2) [99+99] 33: Filter1 LFO Modulation 33a: LFO 1/2 Intensity to A (LFO1) [99+99] Intensity to B (LFO1) [99+99] JSY Intensity to A (LFO1) [99+99] 34: Filter1 EG Filter EG is also an AMS source Program P3: Filter 34: Filter1 EG 69 34a: EG Reset AMS (EG Reset) [List of AMS Sources] 34b: Envelope Break [99+99] 70 Different curve settings for up and down 34c: Level Modulation Program P3: Filter 35: Filter2 71 35: Filter2 36: Filter2 Modulation 37: Filter2 LFO Modulation Page Program P4: Amp/EQ 41: Amp1/Driver1 73 Program P4: Amp/EQ 41: Amp1/Driver1 41a: Driver Drive [0099 AMS (Drive) [List of AMS Sources] 74 Low Boost [0099] AMS (Low Boost) [List of AMS Sources] 41b: Amp Level Amp Level [000127] 42: Amp1 Modulation 42a: Keyboard Track Entering notes from the keyboard 76 Differences from other Keyboard Tracks +Inf and Inf ramps Program P4: Amp/EQ 42: Amp1 Modulation 77 Amp Keytrack is also an AMS source 42b: Amp Modulation 42c: LFO 1/2 Intensity (LFO1) [99+99] 43: Amp1 EG 43a: EG Reset AMS (EG Reset) [List of AMS Sources] 43b: Envelope Program P4: Amp/EQ 43: Amp1 EG 79 Different curve settings for up and down 43c: Level Modulation 80 43d: Time Modulation 45: Amp2/Driver2 Program P4: Amp/EQ 46: Amp2 Mod. 81 46: Amp2 Mod. 47: Amp2 EG 49: EQ 49a: 3 Band Parametric EQ Bypass [On, Off] Page Program P5: LFO 51: OSC1 LFO1 83 Program P5: LFO 51: OSC1 LFO1 51a: OSC 1 LFO 1 Start Phase [180+180, Random] AMS (Shape) [List of AMS Sources] Program P5: LFO 51: OSC1 LFO1 85 Fade [0099] Delay [0099] 51b: Frequency Modulation AMS1 (Frequency) [List of AMS Sources] 52: OSC1 LFO2 55: OSC2 LFO1 56: OSC2 LFO2 Program P5: LFO 59: Common LFO 87 59: Common LFO Differences from LFO1/2 59a: Common LFO Start Phase [180+180, Random] AMS (Shape) [List of AMS Sources] 88 Reset AMS [List of AMS Sources] 59b: Frequency Modulation 59c: Frequency MIDI/Tempo Sync 59: Page Menu Commands Program P6: AMS Mixer/Common Key Track 61: OSC 1 AMS Mixer 61a: AMS Mixer 1 Shape, Quantize, Gate] 90 A+B AMS A Amount [99+99] AMS B Amount [99+99] Amt A x B 91 Offset AMS A Amount [199+199] AMS A Offset [199+199] Smoothing 92 AMS A Decay [00+99] Shape Mode [Symmetric, Asymmetric] Bipolar and Unipolar AMS sources 93 Quantize AMS A # Of Steps [232] Tip: Quantized Ribbon Pitch Bend Gate Control 94 Gate Output Below Threshold [Fixed Value, AMS A] Fixed Value [-99+99] At & Above Threshold [Fixed Value, AMS B] 65: OSC 2 AMS Mix 69: Common Keyboard Track What does Keyboard Tracking do? 96 69a: Keyboard Track 1 Entering notes from the keyboard +Inf and Inf ramps 69b: Keyboard Track 2 Page 98 Program P7: KARMA Turning KARMA on and off Linking KARMA settings to Program changes 71a: Program Name, Load GE Options, KARMA T.Sig, Tempo Program [0127 (INT and USER Banks), 99 KARMA T.Sig (Time Signature) [GE/TS, 1/416/4, 1/816/8, 1/1616/16] GE Setup Bottom (Key Zone Bottom) [C1G9] Top (Key Zone Top) [C1G9] 100 7-1: Page Menu Commands 72a: Program Name and Tempo Program [(0127 (INT and USER Banks), 72b: MIDI Filter Program P7: KARMA 72: MIDI Filter/CC Offset After Touch [Off, On] Pitch Bend [Off, On] Damper (CC#64) [Off, On] JS+Y (JS+Y CC#01) [Off, On] 102 Envelope1/Envelope2/Envelope3 [Off, On] GE Notes [Off, On] WaveSeq [Off, On] 72c: CC Offset 103 73a: Program Name and Tempo 73b: Module Parameter-Control Transpose [36+36] Force Range [Off, Lowest, Highest, C3B3[1], C3B3[2]] Page Mode [Auto, Dyn, Auto+Dyn1, Auto+Dyn2] Size [ Event] Chord Trigger Mode [Off, 1st, Chord1, Chord2, Chord3] Velocity Sense Bottom [001127] Mode (Note Map Mode) [Off, On-Main, On-Repeat, On-All] Table (Note Map Table) [Custom, Gtable 1Gtable 64] Transpose (Note Map Transpose) [12+12] 107 Chord Track (Note Map Chord Track) [Off, On] Keyboard Track (C2 Ref) (Note Map Kbd Track) [Off, On] Note Map Table Display 7-3: Page Menu Commands 108 74a: Program Name and Tempo 74b: Module Parameter-Trigger Quantize Trigger [Off, On] Update On Release [Off, On] Program P7: KARMA 74: Module Parameters-Trigger Envelope Trigger [Any, AKR, 1st, Dyn] Envelope Latch [Off, Sus1, Rel1, Sus2, Rel2] 110 7-4: Page Menu Commands 75a: GE Number & Name, RTC Select, and Tempo GE Number & Name [0000: Arp Model 01 Up/Dn GE RTC Select [116, 1732] 111 MIN (Minimum Value) [5000+5000] MAX (Maximum Value) [5000+5000] VALUE [5000+5000] ASSIGN [---, Slider18, Slider (SW)18, SW18, DynaMIDI18] 112 76a: Program Name and Tempo 76b: Perf Real-Time Parameters Real-Time Parameters 18 Group [ Page Page Program P7: KARMA 76: Perf Real-Time Parameters 115 Key Zone Bottom [+0000+0127] Key Zone Top [+0000+0127] Transpose In Thru [0036+0036] Transpose Out Thru [0036+0036] 116 77a: Program Name and Tempo 77b: Dynamic MIDI Dynamic MIDI 18 Input (Input Module) [A] 117 Destination [Off, RT Params ControlBuffer Latch] Polarity [+, , +/, /+] 7-7: Page Menu Commands 118 78a: Program Name and Tempo 78b: Start Start Seed [21474836480: Random+2147483647] How the Start Seed value affects the phrase Program P7: KARMA 78: Random Seeds 120 7-8: Page Menu Commands Program P7: KARMA 79: Name/Note Map 121 79a: Program Name and Tempo 79b: Module A Slider1Slider8 [000: (no name) 571: Waveform Select [16]] Switch1Switch8 [000: (no name) 571: Waveform Select [16]] 122 Out (Note Out) [Remove, C-1G9] Table Grid Octave Replicate [Off, On] Reset [button] Program P8: Insert Effect 81: Routing 81b: Program Information & Use DKit Bank [(INTAINTG, USERAUSERG)] Program Name [000127/001128: Name] Use Dkit Setting [Off, On] 124 81c: Bus Select (IFX/Indiv.Out Assign) All OSCs to [L/R, IFX112, 18, 1/27/8, Off] 81d: FX Control Bus All OSCs to [Off, 1, 2] 125 81f: OSC MFX Send OSC1 Send1 (to MFX1) [000127] OSC1 Send2 (to MFX2) [000127] OSC2 Send1 (to MFX1) [000127] OSC2 Send2 (to MFX2) [000127] 126 85a: Effect/EXi Fixed Resource Meter Background information The resource meter Program P8: Insert Effect 85: Insert FX 127 85b: IFX IFX1 [000185] Category/IFX Select menu Chain to [IFX2IFX12] Bus Sel. (Bus Select) [L/R, 18, 1/27/8, Off] Send1 [000127] Send2 [000127] Program P8: Insert Effect 86: Track View Page Program P8: Insert Effect 87: IFX 112 Using Effect Presets Frequency [0.0220.00 Hz] Base Note [ , 3 , , 3 , , 3 , , 3 , , ] Program P8: Insert Effect 89: Common FX LFO 134 Program P9: Master/Total Effect 91a: MFX1, 2 MFX1 [000185] Category/MFX Select menu Return 1 [000127] 135 Chain: Page Program P9: Master/Total Effect 93: MFX2 138 Program: Page Menu Commands ENTER + 0-9: shortcuts for menu commands Write Program Saving edits to GM Programs Shortcut: SEQUENCER REC/WRITE Program: Page Menu Commands Auto Assign KARMA RTC Name Auto Optimize RAM Specifying the save destination for a WAVE le Playing back a WAVE le Program: Page Menu Commands Auto Sampling Setup Initialize Resample Program Play Specify the writing destination REC Audio Input Program: Page Menu Commands Copy Tone Adjust Automatically-set parameters and their values 144 Copy Oscillator Swap Oscillator Program: Page Menu Commands Sample Parameters 145 Sample Parameters Index [001128] Sample [000] Level [-99+00+99] 146 Swap LFO 1&2 Settings copied by Copy KARMA Module Program: Page Menu Commands Initialize KARMA Module Settings initialized by Initialize KARMA Module Checking the Freeze Randomize function, and performing Capture Random Seed Procedure Program: Page Menu Commands Copy Insert Effect From (Mode) [Program, Combination, Song, Sampling Mode] From (Bank and Number) [Bank and Number] Set to Current [button] (Effects slot select) [IFX 112, MFX 1&2, TFX 1&2] All [check-box] Program: Page Menu Commands Cut IFX Slot Auto Routing always enabled on the Track View page Drum Kits not supported by Auto Routing Program: Page Menu Commands Copy MFX/TFX Page 155 Program mode: EXi EXi Common parameters Auto Song Setup 01a: Bank, Program, and Categor y Select Bank [INT-F, USER-AG] Program Select [000127, Name] Common Voice Assign Mode Common Step Sequencer Common LFO Graphic 3 Band EQ Graphic 07: Controller View/Effects 0-9e: RT/KARMA (Real Time 0-9f: Tone Adjust 158 EXi Program P4: Basic/Vector 41: Program Basic 41a: EXi 1 EXi 1 Instrument Type [List of installed EXi] 41b: EXi 2 159 (Voice Assign Mode) [Poly, Mono] Poly Poly Legato [Off, On] Mono 160 Chord [Off, Bsc, Adv] Source Pad [1...8] Unison Unison [On, Off] 161 41d: Key Zone Setting Key Zones from the keyboard EXi 1 Bottom [C-1G9] EXi 1 Top [C-1G9] 42: EXi Audio Input EXi Program P4: Basic/Vector 45: Vector Control 163 42a: EXi 1 Input Source [Off, Audio Input 1/2...3/4, 45: Vector Control 46: Vector Envelope 46: Page Menu Commands 48: Set Up Controllers 49: Set Up Pads EXi Program P5: Modulation 51: Common Step Seq EXi Program P5: Modulation 51: Common Step Seq Differences from per-voice Step Sequencers Creating melodic patterns with the Step Sequencer 166 51a: Step Sequencer 51b: Sequencer Reset 51c: Value AMS Input 51d: Step Parameters 52: Common LFO 53: Common Keyboard Track EXi Program P6: EQ EXi Program P7: KARMA Page EXi Program: Page Menu Commands 53: Common Keyboard Track 169 EXi Program: Page Menu Commands Copy EXi Oscillator Copy Step Sequencer Some AMS settings are not copied Page 171 EXi: AL-1 Analog Synthesizer EXi 1 AL-1 Overview Unsupported EXi Common parameters EXi 2 172 Oscillators Common Key Zone Pitch Filter 173 EGs, LFOs, and Step Sequencer 174 Program P4: OSC Pitch 41: OSC Basic Modeling vintage analog synths 41a: Oscillator 1 Waveform Program P4: OSC Pitch 41: OSC Basic Initial Phase [-180+180, Random] Wave Morph [000100] AMS Intensity [100+100] Pulse Width/Phase/Detune [000100] 176 Octave [2[32], 1[16], +0[8], +1[4], +2[2]] Frequency Offset [-10.0 Hz +10.0 Hz] Randomizing frequency for an analog feel 41b: Oscillator 2 42: Sub/Noise/Ring Mod 42a: Sub Oscillator Waveform [Square, Triangle] 42b: Ring Modulator Mode [Ring Mod, AM, Rectify, Clip] 43: Mixer 43a: Oscillator 1 Level [099] Program P4: OSC Pitch 43: Mixer 179 Balance [099] Phase Invert [Off, On] 43b: Oscillator 2 43c: Sub OSC/Audio Input 44: Pitch Common 44a: Pitch Pitch Slope [-1.00+0.00+2.00] JS+ X [-60+60 semitones] JS- X [-60+60 semitones] 181 44b: Portamento Time [000127] 44c: LFO 44: Page Menu Commands 45: Pitch EG/Mod 45a: OSC 1 & Sub OSC Pitch EG 45b: OSC 2 Pitch EG 45c: OSC 1 & Sub OSC Pitch Modulation 183 45d: OSC 2 Pitch Modulation 184 Program P5: Filter 51: Filter Basic Interaction between the lters and the mixer Standard serial conguration Standard parallel conguration Dual signal paths 185 51a: Routing 51b: Filter A Low Pass, High Pass, Band Pass, Band Reject, Multi Filter Trim [0099] 186 Frequency Fine [-99+99] Resonance Type [Standard, High] Resonance Bass [Tight, Full] Resonance Mod by AMS [List of AMS Sources] 52: Multi Filter Whats a Multi Filter? 52a: Filter A Fine [99+99] 52b: Mode Crossfade 53: Filter Modulation Program P5: Filter 53: Filter Modulation 189 53a: Keyboard Track Key Follow 53b: Filter EG EG 3, EG 4, Amp EG] 190 EG Intensity [99+99] 53c: Filter Modulation Filter A Frequency Filter B Frequency Program P5: Filter 54: Filter LFO Mod 54: Filter LFO Mod 54a: Filter A LFO Intensity [99+99] JS -Y Intensity [99+99] 54b: Filter B Program P6: Amp 61: Amp/Driver 61a: Driver Drive [099] Program P6: Amp 61: Amp/Driver 193 Low Boost [099] 61b: Amp Level Amp Level [0127] 61c: Pan 62: Amp Modulation 62a: Keyboard Track Program P6: Amp 62: Amp Modulation 195 62b: Amp Modulation 196 63: Amp EG 63a: EG Reset 63b: Amp EG Program P6: Amp 63: Amp EG 197 63c: Level Modulation 63d: Time Modulation 198 63: Page Menu Commands Program P7: EG 1-4 71: EG 1 (Filter) 199 Program P7: EG 1-4 71: EG 1 (Filter) 71a: EG Reset 200 71b: Envelope Sustain [99+99] Different curve settings for up and down Program P7: EG 1-4 71: EG 1 (Filter) 201 71c: Level Modulation 71d: Time Modulation 72: EG 2 (Pitch) 73: EG 3 74: EG 4 Program P8: Step Seq/LFO 81: Step Sequencer 203 Program P8: Step Seq/LFO 81: Step Sequencer 81a: Step Sequencer Mode [Loop, One Shot] Start Step [132] Intensity [-32+32] 204 81b: Sequencer Reset 81c: Value AMS Input 81d: Step Parameters Program P8: Step Seq/LFO 82: LFO 1 82: LFO 1 82a: LFO 1 Start Phase [-180+180, Random] Program P8: Step Seq/LFO 82: LFO 1 207 Fade [0099] Delay [099] 82b: Frequency Modulation 208 83: LFO 2 84: LFO 3 85: LFO 4 Program P9: AMS Mixer 91: AMS Mixer 209 Program P9: AMS Mixer 91: AMS Mixer 91a: AMS Mixer 1 Shape, Quantize] 91b: AMS Mixer 2 Tone Adjust AL-1 Tone Adjust parameters Oscillator 1 Oscillator 2 Oscillators common Tone Adjust 91: AMS Mixer Step Sequencer Pitch 212 EXi AL-1: Page Menu Commands Copy Envelope Swap Envelope Copy LFO Swap LFO EXi: CX-3 Tonewheel Organ CX-3 Overview CX-3 uses EXi xed resources Unsupported EXi Common parameters 214 Display shows programmed valuesnot AMS CX-3 Drawbar Mode Keyboard Split 215 Upper Rotary Speaker 216 Program P4: Basic 41: Basic 41a: Drawbar Mode Drawbar Mode [Normal, EX] 41b: Tone Wheel Type [Vintage, Clean] 42: Controllers 42a: Pitch Bend JS+ X [-60+12] JS- X [-60+12] 42b: Expression 218 Expression Minimum [030] Expression Level [099] Mode [Level Only, AMS Only, Both Scale, Both Overwrite] 42c: Wheel Brake Program P5: Split & Drawbars 51: Keyboard Split 51a: Split 220 52: Drawbars Use Tone Adjust for physical drawbars Wrap-around 52a: Lower Drawbar Levels 16 [08] 53: EX Drawbars Wrap-around and EX mode 53a: Lower EX Drawbars EX Drawbar Pitch Mode [Preset 14, Custom] 53b: Custom Drawbar Settings 222 53c and 53d: Upper EX Drawbars 223 Program P6: Percussion 61: Percussion 61a: Percussion 61b: Level 224 62: EX Percussion 225 62a: EX Percussion 226 Program P7: Amp, V/C, Rotary Speaker 71: Amp & V/C 71a: Amp Amp Type [Type 1, Type 2, Pre Amp] Amp Gain [0099] Intensity [-99+99] 227 71d: Preset 71e: Custom 71f: Main Output 228 72: Rotary Speaker 72a: Rotary Speaker Rotary On [Off, On] 229 72b: Mode/Speed Mode Speed 72c: Horn 230 Horn Mic Distance [000100] Horn Mic Spread [000100] 72d: Rotor Fast Speed [000100] Program P9: AMS Mixer 91: AMS Mixer 91a: AMS Mixer 1 Shape, Quantize] 91b: AMS Mixer 2 Tone Adjust CX-3 Tone Adjust parameters Drawbars Percussion Vibrato/Chorus Changes from the original CX-3 Noise Level range improved EX Mode enhanced Split Transpose increased Expression parameters per-Program EXi CX-3: Page Menu Commands Copy Drawbars Swap Drawbars EXi: STR-1 Plucked String STR-1 Overview STR-1 uses EXi xed resources STR-1 Overview + + Legend 237 Excitation Pluck PCM Oscillator Excitation (Mixer) Page Program P4: String 4-1: Pluck and Noise 239 Program P4: String 4-1: Pluck and Noise 4-1a: Pluck Type [Ac Guitar 1Harpsichord] Randomization [0100] Use Saturation & Filter [Off, On] 240 Delay (milliseconds) [0...250] Intensity [250+250] Width [-100.0+100.0] Tips for avoiding thumpy excitation 4-2: PCM Oscillator Using PCM in the STR-1 Using PCM samples to pluck the string Using the string as a comb lter for PCM 242 Layering PCM with modeled string timbres Creating an initialized STR-1 Program 42a: Multisamples Velocity splits 4-3: PCM Oscillator Pitch 4-3a: Main 244 Frequency Offset [10.0 Hz +10Hz] Pitch Slope [-1.00+0.00+2.00] JS+X [-60+60 semitones] JS-X [-60+60 semitones] 245 4-3d: Pitch EG 4-3e: Pitch Modulation 246 4-4: Excitation Mixer 4-4a: PCM Oscillator 4-4b: Pluck 4-4c: Noise Generator 4-4d: Excitation Filter Program P4: String 4-4: Excitation Mixer Trim [00100] Frequency [00100] Resonance [00100] 248 4-5: String Main 4-5a: Excitation How Position affects the timbre Program P4: String 4-5: String Main 249 Tracking Mode [String Track, Keyboard] Tone [-100+100] What does Tone do? 4-5b: Harmonic Use Excitation Position [Check-box] Tracking Mode [String Track, Keyboard] Pressure [0.0100.0] 251 4-5c: Decay 4-5d: Nonlinearity 252 4-6: Damping and Dispersion 4-6a: Damping String Track Program P4: String 4-6: Damping and Dispersion 253 4-6b: Dispersion Dispersion [0100.0] Character [Bell, String] AMS 3 [List of AMS Sources] 4-7: String Pitch 4-7a: Main Pitch Slope [-1.00+0.00+2.00] JS+ X [-60+60 semitones] JS- X [-60+60 semitones] 255 Time [000...127] 4-7c: LFO 4-7d: Pitch EG 256 4-8: Pickups and Feedback 4-8a: Pickup 1 Program P4: String 4-8: Pickups and Feedback 257 Harmonic and Pickup Positions Pickup Position and Note Tracking Mode [String Track, Keyboard, Off] Creating chorusing with the pickups Source and Channel Distance (meters) [0.23...10.00] Intensity [-10.00+10.00] Orientation (degrees) [-180...+180] Intensity [-180...+180] 4-9: Mixer 4-9a: String Balance [0100] Phase Invert [Off, On] 4-9b: PCM Oscillator Page Program P5: Filter 5-1: Filter Basic 261 Program P5: Filter 5-1: Filter Basic Interaction between the lters and the mixer Standard serial conguration Standard parallel conguration Dual signal paths 262 51b: Filter A Low Pass, High Pass, Band Pass, Band Reject, Multi Filter Trim [0099] Program P5: Filter 5-1: Filter Basic 263 Frequency Fine [-99+99] Resonance Type [Standard, High] Resonance Bass [Tight, Full] Resonance Mod by AMS [AMS Sources] 5-2: Multi Filter Whats a Multi Filter? 52a: Filter A Fine [99+99] 5-2b: Mode Crossfade 5-3: Filter Modulation 266 53a: Keyboard Track Key Follow 5-3b: Filter EG Program P5: Filter 5-3: Filter Modulation 267 EG Intensity [99+99] 5-3c: Filter Modulation Filter A Frequency AMS 1 [AMS Sources] AMS 2 [AMS Sources] 5-4: Filter LFO Mod 5-4a: Filter A LFO Intensity [99+99] JS -Y Intensity [99+99] 5-4b: Filter B Program P6: Amp 6-1: Amp 61a: Amp Level Amp Level [0127] 61b: Pan 6-2: Amp Modulation 62a: Keyboard Track Program P6: Amp 6-2: Amp Modulation 271 62b: Amp Modulation AMS1 [AMS Sources] AMS2 [AMS Sources] AMS3 [AMS Sources] 6-3: Amp EG 6-3a: EG Reset 63b: Amp EG Program P6: Amp 6-3: Amp EG 273 6-3c: Level Modulation 6-3d: Time Modulation AMS1 [AMS Sources] 274 6-3: Page Menu Commands Page Program P9: AMS Mixers and String Track AMS Mixers String Track 9-1: AMS Mixers 1-2 9-2: AMS Mixers 3-4 9-9: String Track 277 Fret Number AMS Source 9-9a: Fret Position Fret Position [Open, 148] Intensity [-48+48] STR-1 Tone Adjust STR-1 Tone Adjust parameters Pluck Noise PCM Oscillator STR-1 Tone Adjust 9-9: String Track Excitation Filter String String Pitch Pickups Page EXi: MS-20EX MS-20EX Overview MS-20EX uses EXi xed resources 282 On-screen knobs and switches, and the Parameter Details area Parameter Details Using the graphic parameters Editing knobs Editing on/off switches 283 Oscillators and Filters MG/EG/Mod Patch Panel EG 36 Graphics Page Program P4: Oscillators & Filters 4-1: Oscillators & Filters 285 Program P4: Oscillators & Filters 4-1: Oscillators & Filters 4-1a: Oscillators VOLTAGE CONTROLLED OSCILLATOR 1 WAVE FORM [ , , , ] PW [0.0010.00 (50%0%)] 286 SCALE [32, 16, 8, 4] VOLTAGE CONTROLLED OSCILLATOR 2 WAVE FORM [ , , , RING] PITCH [12.00+12.00] 287 4-1b: High Pass Filter HPF FREQUENCY [0.0010.00] PEAK [0.0010.00] PEAK and lter saturation 288 TRANSPOSE [-24.00+24.00] 4-1e: PAN & ANALOG ANALOG [0.0010.00] 4-1f: Parameter Details Program P5: MG, EG, & Modulation 5-1: MG, EG, & Modulation 51a: VOLTAGE CONTROLLED AMPLIFIER VOICE ALLOCATION [EG1EG6] What does this mean, and when is it useful? 51b: MODULATION GENERATOR (MG) 290 KEY SYNC [ON, OFF] BASE NOTE [1/11/32] WAVE FORM [ ] FREQUENCY/TIMES [0.00...10.00/16...1] 291 ATTACK TIME [0.0010.00] DECAY TIME [0.0010.00] SUSTAIN LEVEL [0.0010.00] RELEASE TIME [0.0010.00] 292 51f: EXTERNAL MODULATION 2 5-1g: Mixers MIXER 1 MIXER 2 5-1h: Parameter Details Program P6: Patch Panel 6-1: Patch Panel Using the Patch Panel Basic patching rules Making connections Deleting connections 294 Clearing all connections from the Patch Panel Different jacks have different voltage scales Patch Panel modications 295 Tip: Creating self-triggering patches 61a: VCOs 1 and 2 (VCO 1) OUT jack (VCO 2) OUT jack 296 (LPF) CUTOFF FREQ input jack (LPF) IN jack (LPF) OUT jack 61c: VCA, VOLUME, and outputs 297 CLOCK input jack IN jack Creating the classic sample-and-hold effect Generating a random value at note-on 298 EG 1 TRIG IN jack 61f: Modulation VCA (MVCA) CONTROL INPUT jack IN jack 299 61j: MIXERS 1 and 2 MIXER 1 IN A jack IN B jack 300 SIGNAL IN jack SIGNAL LEVEL knob [0.0010.00] (SIGNAL) OUT jack BAND PASS FILTER 301 Using the External Signal Processor (ESP) 6-1l: Parameter Details Input and Output Jacks Disconnect button 302 Int (Intensity) [range depends on parameter] KBD TRIG OUT jack Trigger On [Note Gate + Sustain, Note Gate] Knobs Page Page MS-20EX Tone Adjust Common Tone Adjust parameters 305 MS-20EX Tone Adjust Common Tone Adjust parameters MS-20EX Tone Adjust parameters Page 307 EXi: PolysixEX PolysixEX Overview PolysixEX uses EXi xed resources PolysixEX Overview Legend On-screen knobs and switches, and the Parameter Details area Parameter Details Using the graphic parameters Editing knobs and sliding switches Editing on/off switches 309 VCO/VCF/EG/MG Arpeggiator EG 2,3 Graphics LFO 1,2 Graphics Page Program P4: Main 4-1: Main 311 Program P4: Main 4-1: Main 4-1a: VCO VIBRATO INT [0.00...10.00] OCTAVE [16', 8', 4'] WAVEFORM [SAW, PW, PWM] 312 PWM SPEED [0.00...10.00] SUB OSC [2OCT, 1OCT, OFF] 4-1b: MG (Modulation Generator) TEMPO SYNC [Off, On] 313 KBD TRACK [0.0150.0] 4-1d: EG ATTACK [0.00...10.00] DECAY [0.00...10.00] 314 VOLUME [0.00...10.00] 4-1g: PITCH BEND RANGE [0.00...12.00] TRANSPOSE [-24.00+24.00] Page 316 Program P5: Modulation & Arpeggiator 5-1: Modulation & Arpeggiator 5-1a: EXTERNAL MODULATION Source 1 SOURCE 1 [List of AMS Sources] VCO PULSE WIDTH [10.00+10.00] 317 BASE NOTE [1/1...1/32] SPEED/TIMES [0.00...10.00/16...1] RANGE [1OCT, 2OCT, FULL] MODE [UP/DOWN, DOWN, UP] Program P7: EG 2-3 7-1: EG 2 7-2: EG 3 Program P8: LFO 1-2 8-1: LFO 1 8-2: LFO 2 Program P9: AMS Mixers 9-1: AMS Mixers 1-2 9-2: AMS Mixers 3-4 PolysixEX Tone Adjust Common Tone Adjust parameters PolysixEX Tone Adjust parameters VCO VCF VCA EG OUTPUT Combination mode Combination P0: Play Auto Song Setup 01: Program Select/Mixer 01a: Combination Select Combination Select [000127] To switch combinations Bank/Combination Select Combination P0: Play 01: Program Select/Mixer Category/Combination Select Hold Balance [Off, On] 324 01b: Timbre Program Select Selected Timbre Info Gray color and [Inactive] warning in Timbre Info Category (Timbre Program) [0017] Category/Program Select Combination P0: Play 01: Program Select/Mixer Bank/Program Select Status [Off, INT, EXT, EX2] Using the control surface to make timbre settings Play/Mute [Mute, Play] 326 CX-3 & STR-1: Limitations on EXi xed resources EXi with xed resources Limits on usage of xed resources Combination P0: Play 06: KARMA GE Gray Timbre/Track number, and [Inactive] shown after Program name Use Program Changes to optimize resource usage 328 06a: Combination Select, Load GE Combination [0127] KARMA T.Sig (KARMA Time Signature) [GE,/TS, 1/416/4, 1/816/8, 1/1616/16] A (Module A) 329 Module ID [A, B, C, D, P] Parameter No. [0132] Parameter Value 06c: Note/CC Activity A (Module A) 330 07a: Combination Select Combination [000127] 07b: Assignment View Combination P0: Play 08: Audio Input/Sampling Page Page Page 335 09a: Combi Select & Tempo Bank [INT AE, USER AG] Combi [000127] 09b: Timbre 18/916 336 Knobs 18, Individual Pan Pan 1/9 [Random, L001C064R127] Pan 2/108/16 [Random, L001C064R127] Play/Mute switches 18 Page 338 Play/Mute (16) [Play, Mute] Select (16) [Off, On] Sliders 16 Switch On/Off (116) [Off, On] 340 09e: RT/KARMA (Real Time Knobs/KARMA) Control [SW18, SL18] Module and Parameter [AD 0132, P 0108] KARMA Module Control 341 Knobs 58 [000127] KARMA SCENES 1-8 KARMA Scenes [18] KARMA SWITCHES 1-8 342 09f: Tone Adjust Timbre select Timbre [116] Auto Load PRG [Off, On] Assignments are exclusive 344 Common Tone Adjust Parameters Page 346 Combination P1: EQ/Vector/Controller 11: Timbre EQ Timbre EQ and the control surface 11a: Combination Name Combination Name [(000127: Name)] 11b: 3 Band Parametric EQ Selected Timbre Info Combination P1: EQ/Vector/Controller 11: Timbre EQ Auto Load Prog EQ [Off, On] Bypass [On, Off] High Gain [18.0+00.0+18.0dB] Mid Frequency [100Hz10kHz] 15: Vector Volume Control Program and Combi Vectors work together How Combi Vector Volume works 15a: Combination Name Combination Name [(000127: Name)] 349 15b: Vector Volume Control 350 Equal Amount [Off, On] 15c: Vector Graphic Timbre Select [0116] Show Point [VJS, Vector EG Point 04] 16: Vector CC Control 16a: Vector CC Control Program and Combi Vectors work together Combination P1: EQ/Vector/Controller 16: Vector CC Control 353 CC at Show Point [%] Enable Combi Vector CC [Off, On] Enable Program Vector CC [Off, On] Timbres 0216 17: Vector Envelope 17a: Basic Combination P1: EQ/Vector/Controller 17: Vector Envelope 355 17b: Vector Envelope Loop 17c: Vector Envelope (Base Note) [Off, ] Combination P1: EQ/Vector/Controller 18: Set Up Controllers 357 17: Page Menu Commands 18b: Realtime Modulation Knob Assign 358 19a: Pad Chords MIDI Channel [Ch01Ch16, Gch] Combination P1: EQ/Vector/Controller 19: Set Up Pads 359 Notes 1-8 [Off, C1G9 / 001127] Pads 28 360 Combination P2: Timbre Parameters 21: MIDI 21a: MIDI Status [Off, INT, EXT, EX2] MIDI Channel [0116, Gch] Bank Select MSB (When Status = EX2) [000127] Bank Select LSB (When Status = EX2) [000127] 22: OSC 22a: OSC Force OSC Mode [PRG, Poly, MN, LGT] OSC Select [BTH, OS1, OS2] Portamento [PRG, Off, 001127] Chord [PRG, Off, Bsc, Adv] Source Pad [PRG, 1...8] Combination P2: Timbre Parameters 23: Pitch 363 23: Pitch 23a: Pitch Transpose [60+00+60] Detune (Use BPM Adj. in Page Menu) [1200+0000+1200] Bend Range [PRG, 24+00+24] 24: Delay 24a: Delay Combination P2: Timbre Parameters 25: Wave Sequence/KARMA 365 Time [ms] [00006000ms, KeyOff] 25: Wave Sequence/KARMA Wave Sequence Key Sync [PRG, Off, On] 366 Wave Sequence Swing[%] [PRG, 300+300] Wave Sequence Quantize Trigger [PRG, Off, On] KARMA Timbre Off Control [Normal, Timbre Off by KARMA Off, Timbre Off by KARMA On] 25: Page Menu Commands 26: EXi Audio Input 26a: EXi 1 Input Source [PRG, Off, Audio Input 1/2...3/4, Indiv. Output 1/2...7/8, REC 1/23/4, 26b: EXi 2 Combination P3: MIDI Filter/Zones 31: MIDI Filter1 31a: MIDI Filter1 Enable Damper [Off, On] Enable Portamento SW [Off, On] Enable JS X as AMS [Off, On] 32: MIDI Filter2 32a: MIDI Filter2 Enable Realtime Control Knob 1 [Off, On] Enable Realtime Control Knob 2 [Off, On] Enable Realtime Control Knob 3 [Off, On] 33: MIDI Filter3 33a: MIDI Filter3 Combination P3: MIDI Filter/Zones 35: Keyboard Zones 371 35: Keyboard Zones 35a: Zone Map 35b: Keyboard Zones Top Slope [00, 01, 02, 03, 04, 06, 08, 10, 372 Bottom Slope [00, 01, 02, 03, 04, 06, 08, 10, Bottom Key [C1G9] 35: Page Menu Commands Combination P3: MIDI Filter/Zones 36: Velocity Zones 36: Velocity Zones 36a: Zone Map 36b: Velocity Zones Top Velocity [1127] Top Slope [0120] 374 36: Page Menu Commands Combination P7: KARMA 71: GE Setup/Key Zones 375 Combination P7: KARMA Turning KARMA on and off Linking KARMA settings to Program changes 71a: Combination Name, Load GE Bank [INTAG, USERAG] Combination [0127] 376 Module Zone Display 71b: GE Setup/Key Zones GE Key Zones Transpose Combination P7: KARMA 71: GE Setup/Key Zones Output Channel [0116, Gch] Timbre Thru (when KARMA Off) [Off, On] Example setting 1 378 Example setting 2 Module Timbre MIDI Display 379 72a: MIDI Filter 72b: CC Offset 380 CC Number [Off, MIDI CC#00CC#95] Value [000127] 73a: Module Parameter-Control Timbre Zone Bypass [Off, On] 381 73: Page Menu Commands 382 Delay Start [Off, Fixed, 64T 4x1] Delay Start Fixed [0000ms5000ms] Trigger [Any, AKR, 1st, Dyn] Latch [Off, Sus1, Rel1, Sus2, Rel2] Module Trigger Trigger By Module [Off, A, B, C, D] 383 75a: GE Number & Name, RTC Select, and Tempo 75b: GE Real-Time Parameters for Module Control = Master GE Real-Time Parameters 0132 384 75c: GE Real-Time Parameters for Module Control = A, B, C, D GE Real-Time Parameters 0132 75d: Module Control Scene Matrix Master [18] A [18] B [18] C [18] D [18] 385 75: Page Menu Commands 76a: Perf Real-Time Parameters (18) 386 76: Page Menu Commands Combination P7: KARMA 77: Dynamic MIDI 387 77a: Dynamic MIDI (18) Input (Input Module) [AD] Source [Off, JS+Y #01Vel Out Z] Bottom (Range Bottom) [000127] 388 78a: Seed Rhythm (Rhythm Seed) A [1, 2, 3, 4] B [1, 2, 3, 4] C [1, 2, 3, 4] D [1, 2, 3, 4] Combination P7: KARMA 78: Random Seeds 389 Duration (Duration Seed) Index (Index Seed) Cluster (Cluster Seed) Velocity (Velocity Seed) 390 79a: Name Master, Module AD 79b: Note Map Combination P7: KARMA 79: Name/Note Map 391 79: Page Menu Commands Combination P8: Insert Effect 81: Routing1 Combination P8: Insert Effect 81: Routing1 393 81b: Routing1 Page Combination P8: Insert Effect 82: Routing2 395 82: Routing2 82a: Routing2 REC Bus (All OSCs to) [Off, 14, 1/2, 3/4] Page 397 85b: Effect/EXi Fixed Resource Meter 85: Page Menu Commands Used in Tracks Timbre Select [Timbre 01Timbre 16] Slot [IFX1IFX12] Combination P8: Insert Effect 87: IFX 112 Ch (Control Channel) [Ch0116, G ch, All Routed] Drum Kits and the MIDI Control Channel Page Combination P8: Insert Effect 89: Common FX LFO Ch (Control Channel) [Ch01Ch16, G ch] Frequency [0.0220.00 Hz] BPM [MIDI, 040.00240.00] Base Note [ , 3 , , 3 , , 3 , , 3 , , ] 402 Combination P9: Master/Total Effect 91a: MFX1, 2 Chain Combination P9: Master/Total Effect 92: MFX1 Ch (Control Channel) [Ch0116, G ch] Page Combination: Page Menu Commands ENTER + 09: shortcuts for menu commands 405 Combination: Page Menu Commands ENTER + 09: shortcuts for menu commands Write Combination Copy From Program Page Combination: Page Menu Commands Copy Tone Adjust 407 Show EQ Graphic 408 Detune BPM Adjust Settings copied by Copy KARMA Module Combination: Page Menu Commands Initialize KARMA Module 410 Drum Kit IFX Patch 411 Sequencer mode Sequencer Overview MIDI sequencer MIDI recording features Parameter-related features 412 Editing and operation features Sampling features Hard disk recorder section Common section Setup parameters & Musical data MIDI tracks 116 Setup parameters Master track Setup parameters/Musical data Tip: Auto Song Setup 415 Sequencer P0: Play/REC 01: MIDI Track Prog Select/Mixer 01a: Location, Song/Track Select Meter [**/**, 1/416/4, 1/816/8, 1/1616/16] 416 Changing the time signature in the middle of a song 417 Creating a new song Track Select [MIDI Track01MIDI Track16, Master Track, Audio Track01Audio Track16] RPPR On/Off [Off, On] Metronome [Only REC, REC & Play, Off] 418 Multi REC [Off, On] 01b: Track Program Select Gray color and [Inactive] warning in Track Info Track Category [0017] CX-3: Limitations on EXi xed resources Play/Rec/Mute [Play, Rec, Mute] Recording MIDI Track Pan and Volume Pan [RND, L001C064R127] Page 421 02: Audio Track Mixer 02a: Audio Track Select REC Source = Audio Input 1 (Single Track REC) REC Source = Audio Input 1, 2 (Multi REC) Sequencer P0: Play/REC 02: Audio Track Mixer REC Source = S/P DIF L, R REC Source = L, R Play/Rec/Mute [Play, Rec, Mute] Sequencer P0: Play/REC 02: Audio Track Mixer Recording Audio Track Pan and Volume 426 03: MIDI Track Loop 03a: Track Select Category [(0017)] Track Play Loop [Off, On] Loop Start Measure [001999] 427 03: Page Menu Commands 428 05: Preferences 05a: Recording Setup Overwrite Overdub Manual Punch In 429 Auto Punch In Start Measure [M001M999] Auto Punch In End Measure [M001M999] Loop All Tracks Loop Start Measure [M001M999] Loop End Measure [M001M999] Remove Data [Off, On] 430 Rehearsal [Off, On] 05c: Audio Track Recording Level [dB] Audio Tracks 14 Recording Level 14 [Inf, 72.0+18.0] Level Meter 14 431 Name 14 Take [Off, On] Take No. [0099] 05d: Metronome Setup 432 06a: Location, Track Select, Load GE A, B, C, D (Module A, B, C, D) 06c: Note/CC Activity A, B, C, D (Module A, B, C, D) Sequencer P0: Play/REC 06: KARMA GE 433 06d: Real-Time Controls KARMA SWITCH KARMA SWITCH Stored value KARMA SWITCH Control Timbre Category Name KARMA SWITCH Name KARMA SLIDER 1Stored value KARMA SLIDER 1 Control Timbre Category Name 434 07a: Location, Song/Track Select RPPR [Off, On] 07b: Assignment View Sequencer P0: Play/REC 08: Audio In/Sampling 08: Audio In/Sampling Use Global Setting [Off, On] 436 Input14 Page Page 439 09a: Song Select & Tempo Song [000127] Tempo [040.00240.00, EXT] 09b: MIDI Tracks 18 and 916 440 EQ Trim [0099] Low EQ [18+00.0+18.0dB] Mid EQ Freq [100Hz10kHz] Mid EQ Gain [18.0+00.0+18.0dB] 441 Select 1/98/16 [Off, On] Link KBD/REC Trk to Ctrl Surface [Off, On] Volume Sliders 1/98/16 Volume 1/9 [000127] Page 443 Select (16) [Off, On] Volume Sliders 16 09d: Audio HDR 18 and HDR 916 444 09e: External Switch On/Off (116) [Off, On] 445 09f: RT (Real Time Knobs)/KARMA Control [(SW18, SL18)] Module and Parameter [AD 0132, P 0108] KARMA Module Control 446 Knobs 58 [000127] KARMA SCENES 1-8 KARMA SWITCHES 1-8 Karma Sliders 1-8 447 09g: Tone Adjust Track select Track [116] Auto Load PRG [Off, On] Assignments are exclusive Page 450 Sequencer P1: EQ/Vector/Controller 11: MIDI Track EQ 11a: Location, Song/Track Select RPPR [Off, On] 11b: 3 Band Parametric EQ Track Number Sequencer P1: EQ/Vector/Controller 11: MIDI Track EQ MIDI Track EQ and the control surface 452 12: Audio Track EQ 12a: 3 Band Parametric EQ Track 0116 (Track Number) Recording the Audio Track EQ Audio Track EQ and the control surface 12: Page Menu Commands 15: Vector Volume Control Program and Song Vectors work together How Sequencer mode Vector Volume works 454 15a: Vector Volume Control Sequencer P1: EQ/Vector/Controller 15: Vector Volume Control 455 Equal Amount [Off, On] 15b: Vector Graphic Track Select [0116] Track Volume & CC Display 16: Vector CC Control 16a: Vector CC Control Sequencer P1: EQ/Vector/Controller 16: Vector CC Control Program and Song Vectors work together 458 CC at Show Point [%] Track 01 Enable Song Vector CC [Off, On] Enable Program Vector CC [Off, On] 17: Vector Envelope 17a: Basic 460 17b: Vector Envelope Loop 17c: Vector Envelope Sequencer P1: EQ/Vector/Controller 17: Vector Envelope 462 17: Page Menu Commands Sequencer P1: EQ/Vector/Controller 18: Set Up Controllers 463 18b: Modulation Knob Assign 464 19a: Pad Chords MIDI Channel [Ch01Ch16, Tch] Notes 1-8 [Off, C1G9 / 001127] Sequencer P1: EQ/Vector/Controller 19: Set Up Pads 465 Pad 28 466 Sequencer P2: Track Parameters 21: MIDI 21a: MIDI Status [Off, INT, BTH, EXT, EX2] Sequencer P2: Track Parameters 21: MIDI MIDI Channel [0116] Bank Select MSB (When Status=EX2) [000127] Bank Select LSB (When Status=EX2) [000127] Track Priority [Off, On] 468 22: OSC 22a: OSC Force OSC Mode [PRG, Poly, MN, LGT] OSC Select [BTH, OS1, OS2] Portamento [PRG, Off, 001127] Sequencer P2: Track Parameters 22: OSC Chord [PRG, Off, Bsc, Adv] Source Pad [PRG, 1...8] 470 23: Pitch 23a: Pitch Transpose [60+00+60] Detune (BPM Adj. in Page Menu) [1200+0000 +1200] Bend Range [PRG, 24+00+24] 24: Delay 472 24a: Delay Time [ms] [00006000, KeyOff] Base Note [ , , , , , , , , , ] 24: Page Menu Commands 25: Wave Sequence/KARMA 25a: Wave Sequence/KARMA Wave Sequence Key Sync [PRG, Off, On] Wave Sequence Swing% [PRG, 300.+300] Wave Sequence Quantize Trigger [PRG, Off, On] 474 25: Page Menu Commands Sequencer P2: Track Parameters 2-6: EXi Audio Input 475 2-6: EXi Audio Input 26a: EXi 1 Input Source [PRG, Off, Audio Input 1/2...3/4, Indiv. Output 1/2...7/8, REC 1/2, 3/4, 26b: EXi 2 27: Audio Track Delay 27a: Delay Track 0116 (Track Number) Time [ms] [00006000] Base Note [ , , , , , , , , , ] 27: Page Menu Commands Sequencer P3: MIDI Filter/Zones 31: MIDI Filter1 Sequencer P3: MIDI Filter/Zones 31: MIDI Filter1 31a: MIDI Filter 1 Enable Damper [Off, On] Enable Portamento SW [Off, On] Enable JS X as AMS [Off, On] Enable JS+Y [Off, On] Enable JSY [Off, On] Enable Ribbon [Off, On] Sequencer P3: MIDI Filter/Zones 32: MIDI Filter2 479 32: MIDI Filter2 32a: MIDI Filter 2 Enable Realtime Control Knob 1 [Off, On] Enable Realtime Control Knob 2 [Off, On] Enable Realtime Control Knob 3 [Off, On] 33: MIDI Filter3 33a: MIDI Filter 3 Enable SW1 [Off, On] Enable SW2 [Off, On] Enable Foot Switch [Off, On] Enable Foot Pedal [Off, On] 35: Keyboard Zones 35a: Zone Map 35b: Keyboard Zones Top Slope [00, 01, 02, 03, 04, 06, 08, 10, 482 Bottom Slope [00, 01, 02, 03, 04, 06, 08, 10, Bottom Key [C1G9] 35: Page Menu Commands Sequencer P3: MIDI Filter/Zones 36: Velocity Zones 36: Velocity Zones 36a: Zone Map 36b: Velocity Zones Top Velocity [1127] Top Slope [0120] 484 36: Page Menu Commands Sequencer P4: Track Edit 41: Track Edit 485 Sequencer P4: Track Edit 41: Track Edit 41a: Track data Map 486 41b: Track Select, From Measure, To End of Measure Track Select [MIDI Track01MIDI Track16, Master Track, Audio Track01Audio Track16] From Measure [001999] To End of Measure [001999] MIDI Track Edit commands 42: MIDI Track Name 42a: MIDI Track Names T01T16 [MIDI Track Name] 488 43: AUDIO Track Name 43a: Audio Track Names T01T16 [Audio Track Name] Sequencer P5: Pattern/RPPR 51: Pattern Edit 489 Sequencer P5: Pattern/RPPR 51: Pattern Edit 51a: Location, Resolution, Tempo, Song/Track Select Location [0199] Song Select [000199: name] 490 51b: Pattern, Pattern Select, Metronome, Remove Data How to record a user pattern Pattern (Pattern Bank) [Preset, User] Pattern Select [P000149, U00U99] 52: Pattern Name 52a: User Pattern Names Pattern name [U00U99] 492 53: RPPR Setup 53a: Song Select, Track Select, Tempo Song Select [00199: name] Sequencer P5: Pattern/RPPR 53: RPPR Setup 493 53b: KEY, Keyboard & Assigned graphics KEY (Key Select) [C#2C8] Keyboard & Assigned graphics 53c: RPPR Setup Information Stopping playback of a RPPR pattern Paste Example): Assigning preset patterns P00, P01, and P02 to KEY Sequencer P7: KARMA 53: RPPR Setup Sequencer P7: KARMA 496 71a: Location, Track Select, Load GE Module Zone Display 71b: GE Setup GE Key Zones 497 Btm (Key Zone Bottom) [C1G9] Top (Key Zone Top) [C1G9] Transpose 71c: MIDI I/O Input Channel [0116, Tch] Page Sequencer P7: KARMA 71: GE Setup/Key Zones Track Thru (when KARMA Off) [Off, On] Module Track MIDI Display 500 72a: MIDI Filter 72b: CC Offset 1, 2, 3, 4 501 73a: Module Parameter-Control 502 (Note Map Keyboard Track) [Off, On] Note Map Table Display 73: Page Menu Commands 74a: Module Parameter-Trigger Quantize Trigger [Off, On] Update On Release [Off, On] 503 Envelope Trigger [Any, AKR, 1st, Dyn] Envelope Latch [Off, Sus1, Rel1, Sus2, Rel2] Module Trigger Trigger By Module [Off, A, B, C, D] GE Phrase Length [000100%] Cutoff Module A, B, C, D [Of f, On] 74: Page Menu Commands 504 75b: GE Real-Time Parameters for Module Control = Master 75c: GE Real-Time Parameters for Module Control = A, B, C, D (1-32) 75d: Scene Matrix 75: Page Menu Commands 505 76a: Perf Real-Time Parameters 1...8 76: Page Menu Commands 506 77a: Dynamic MIDI 77: Page Menu Commands Sequencer P7: KARMA 78: Random Seeds 507 78a: Seed Rhythm, Duration, Index, Cluster, Velocity, CC-A/B, Drum, WaveSeq A [1, 2, 3, 4] B [1, 2, 3, 4] C [1, 2, 3, 4] D [1, 2, 3, 4] 78b: Start/Loop Start Seed [2147483648 0: Random+2147483647] 508 79a: Name Master, Module AD 79b: Note Map (Custom) 79: Page Menu Commands Sequencer P8: Insert Effect 81: MIDI Routing1 Sequencer P8: Insert Effect 81: MIDI Routing1 81b: MIDI Routing1 Page Sequencer P8: Insert Effect 82: MIDI Routing2 511 82: MIDI Routing2 82a: MIDI Routing2 Bus Select (IFX/Indiv. Out Assign) REC Bus (All OSCs to) [Off, 1, 2, 3, 4, 1/2, 3/4] 512 83: Audio Routing1 83a: Audio Routing1 Sequencer P8: Insert Effect 83: Audio Routing1 513 Bus Select (IFX/Indiv. Out Assign) [L/R, IFX112, 18, 1/27/8, Off] 83: Page Menu Commands 514 84: Audio Routing2 84a: Audio Routing2 84: Page Menu Commands Page 516 85b: Effect/EXi Fixed Resource Meter Sequencer P8: Insert Effect 86: Track View Used in Tracks Track Select [Timbre 01Timbre 16] Slot [IFX1IFX12] Ch (Control Channel) [Ch0116, All Routed] Sequencer P8: Insert Effect 87: IFX 112 Drum Kits and the MIDI Control Channel P (Effect Preset) [P00, P0115, U0015, ------] Ch (Control Channel) [Ch01Ch16, Gch] Frequency [0.0220.00 (Hz)] Base Note [ , 3 , , 3 , , 3 , , 3 , , ] Sequencer P9: Master/Total Effect Ch (Control Channel) [Ch0116, G ch] P (Effect Preset) [P00, P0115, U0015, ------] Sequencer P9: Master/Total Effect 93: MFX2 524 Sequencer: Page Menu Commands Memory Status Rename Song Delete Song Copy From Song 525 Save Template Song FF/REW Speed Set Location (for Locate Key) 526 GM Initialize Copy from Combination Copy From Program Sequencer: Page Menu Commands Copy From Program GM Initialize List 528 Stereo Pair Sequencer: Page Menu Commands Select Directory 529 Auto HDR/Sampling Setup If you selected Initialize: If you selected HDR (Audio Track Recording): If you selected Bounce Audio Track: Sequencer: Page Menu Commands Auto HDR/Sampling Setup If you selected 2ch MIX to Disk: If you selected Resample SEQ Play: If you selected In-Track Sampling: Sequencer: Page Menu Commands Auto HDR/Sampling Setup 533 In-Track Sampling after you execute this command Auto HDR/Sampling Setup: Automatically-set parameters and their values 534 Bounce All Tracks To Disk Sequencer: Page Menu Commands Copy Tone Adjust 535 Show EQ Graphic Detune BPM Adjust MIDI Step Recording 536 Sequencer: Page Menu Commands Audio Event Edit 537 Audio Event Edit Page Sequencer: Page Menu Commands Audio Event Edit 540 Audio Automation Edit Sequencer: Page Menu Commands Set Song Length 541 Set Song Length Erase Track 542 Copy Track Bounce Track Erase Measure Sequencer: Page Menu Commands Delete Measure 543 Delete Measure 544 Insert Measure Sequencer: Page Menu Commands Repeat Measure 545 Repeat Measure 546 Copy Measure Move Measure Sequencer: Page Menu Commands Create Control Data 547 Create Control Data Erase Control Data 548 Quantize Sequencer: Page Menu Commands Shift/Erase Note 549 Shift/Erase Note Modify Velocity 550 Region Edit Sequencer: Page Menu Commands Region Edit 552 Volume Ramp Sequencer: Page Menu Commands Copy Songs Tempo to Region 553 Copy Songs Tempo to Region Adjust Songs Tempo to Region Adjust Region to Songs Tempo (Time Stretch) 554 Step Recording (Loop Type) Event Edit Pattern Parameter Erase Pattern 555 Bounce Pattern Get From MIDI Track Put To MIDI Track 556 Copy To MIDI Track DrumKit IFX Patch Sequencer: Page Menu Commands Copy MFX/TFX 557 Put Effect Setting to Track Using Put Effect Setting to Track to switch effects Page Sequencer: Page Menu Commands Put Effect Setting to Track 560 System Exclusive events supported in Sequencer mode SysEx messages that can be recorded in real-time Parameter change messages that you can realtime-record in Sequencer mode Page Page 563 Sampling mode Sampling Overview Sampling to RAM, or direct to disk Sampling and RAM Installing additional RAM 564 Editing in Sampling mode Sampling Overview Sampling features 565 Sampling in Program, Combination, and Sequencer modes Note: Changing velocity on the keyboard or pads Sampling frequency and bit resolution Page 567 Sampling P0: Recording 01: Recording 01a: Multisample Select (MS) Multisample Select (MS) [000999] 568 01b: Index, Sample Select, Original Key, Top Key, Create 569 Original Key [C-1G9] Top Key [C-1G9] Range Create 570 ADC OVERLOAD ! 01c: Recording Level [dB] Recording Level [Inf, 72.0+18.0] CLIP ! Page 572 Auto Loop On [Off, On] Auto +12dB On [Off, On] 01e: Create Zone Preference Position [Right (to Selected Index), Left (to Selected Index)] 08: Audio Input 08a: Input PLAY/MUTE [Off, On] SOLO On/Off ADC OVERLOAD ! Recording Level [Inf, 72.0+18.0] CLIP ! Source Bus = REC Bus 1/2 Source Bus = Audio Input 1/2 On (checked): Only the signal of the bus selected for Source Bus = S/P DIF L/R Source Bus = Indiv. 1/2 Pre Trigger REC [000500ms] Trigger [Sampling START SW, Note On, Threshold] Metronome Precount [Off, 4, 8, 3, 6] Resample [Manual, Auto] Key [C-1G9] Threshold Level [63dB0dB] (Tempo) [040.00240.00] Bus (Output) Select [L, R, 18] Page 580 09a: OSC Mixer 581 EQ TRIM [0099] LOW EQ [18.0+00.0+18.0dB] MID EQFREQUENCY [100Hz10kHz] MID EQ GAIN [18.0+00.0+18.0dB] Page 583 Select/Solo (16) [Off, On] MIX VOLUMES sliders 16 584 MIDI Channel (18) [(0116, Gch)] CC# Assign (18) [(Off, 000119)] MIDI Channel (116) [(0116, Gch)] CC# Assign (116) [(Off, 000119)] Knob 58 [000127] 586 Sampling P1: Sample Edit 11: Sample Edit 11a: Multisample Select (MS) Multisample Select [000999] 11b: Index, Sample Select, Range 587 11d: Edit Range Start [000000000] End [000000000] Use Zero [Off, On] Edit Range PLAY/STOP Page Sampling P2: Loop Edit 21: Loop Edit 589 Sampling P2: Loop Edit 21: Loop Edit 21a: Multisample Select (MS) Multisample Select [000999] 21b: Index, Sample Select, Range 590 21d: Sample Setup Start (Start Address) [000000000] Loop Start (Loop Start Address) [000000000] End (End Address) [000000000] 591 21f: ZOOM ZOOM 592 Sampling P3: Multisample Edit 31: Multisample Edit 31a: Multisample Select (MS) Multisample Select (MS) [000999] 31b: Multisample Setup 593 Pitch (BPM Adj. In Page Menu) [64.00+63.00] Constant Pitch Create 31c: Create Zone Preference Page Sampling P4: EQ/Controller 41: EQ 595 Sampling P4: EQ/Controller 41: EQ 41a: 3 Band Parametric EQ (All OSCs) (Freq Response Graphic) 48: Set Up Controllers 48a: Panel Switch Assign Sampling P4: EQ/Controller 48: Set Up Controllers 597 48b: Modulation Knob Assign 598 49: Set Up Pads 49a: Pads 1 49b: Pads 28 Sampling P4: EQ/Controller 49: Set Up Pads 600 Sampling P5: Audio CD Use the SEQUENCER buttons to play the CD 51: Audio CD 51a: Audio CD Play Location [(00:00.0)] 601 Track [01] Index [01] Volume [0127] 51b: CD-R/RW Drive Audio Input Range End [00:00.0] Duration [00:00.0] Range Graphic Sampling P8: Insert Effect 81: Routing 603 Sampling P8: Insert Effect 81: Routing Routing Map 81b: Bus Select Bus Select (IFX/Indiv.Out Assign) (All OSCs to) 604 81c: FX Control Bus 81d: REC Bus REC Bus (All OSCs to) [Off, 14, 1/2, 3/4] 81e: OSC MFX Send Sampling P8: Insert Effect 85: Insert FX IFX1 [000185] Category/IFX Select menu Chain to [IFX2IFX12] 606 85b: Resource Meter and Tempo Sampling P8: Insert Effect 86: Track View P (Effect Preset) [P00, P0115, U0015, ---------------] Sampling P8: Insert Effect 89: Common FX LFO Frequency [0.0220.00 (Hz)] Src (Dmod Src) [List of Dmod Sources] BPM [MIDI, 040.00240.00] Base Note [ , 3 , , 3 , , 3 , , 3 , , ] Page Sampling P9: Master/Total Effect 91: Routing 611 Sampling P9: Master/Total Effect 91a: MFX MFX1 [000185] Category/MFX Select menu Return 1 [000127] 612 MFX2 [000185] MFX2 On/Off [Off, On] Return 2 [000127] Chain Chain On/Off [Off, On] Chain Direction [MFX1MFX2, MFX2MFX1] Sampling P9: Master/Total Effect 92: MFX1 P (Effect Preset) [P00, P0115, U0015, ---------] Page Sampling: Page Menu Commands Delete Sample 615 Sampling: Page Menu Commands ENTER + 0-9: shortcuts for menu commands Remarks on editing stereo samples Start and End settings About Overwrite 616 Copy Sample Rename Sample Move Sample Sampling: Page Menu Commands Sample Mono To Stereo (Change Sample Type) 617 Sample Mono To Stereo (Change Sample Type) Delete MS (Delete Multisample) 618 Copy MS (Copy Multisample) Rename MS (Rename Multisample) Convert MS (Multisample) To Program Sampling: Page Menu Commands MS Mono To Stereo/MS Stereo To Mono (Change Multisample Type) 619 MS Mono To Stereo/MS Stereo To Mono (Change Multisample Type) MS Mono To Stereo : MS Stereo To Mono Move MS (Move Multisample) Specifying the save-destination for a WAVE le Playing back a WAVE le Sampling: Page Menu Commands Auto Sampling Setup 622 Auto Sampling Setup: Automatically-set parameters and their values Sampling: Page Menu Commands Truncate (for Sample Edit) 623 Truncate (for Sample Edit) Cut Clear 624 Copy Insert Mix Sampling: Page Menu Commands Paste 625 Paste Insert Zero 626 Normalize/Level Adjust Volume Ramp Sampling: Page Menu Commands Rate Convert 627 Rate Convert Reverse Link 628 Truncate (for Loop Edit) 629 Time Slice Page Index [Source, xxx(001090)/yyy(001090)] Sensitivity [0030] Page Page 634 Time Stretch Sustaining Slice Using Time Stretch (Sustaining) Sampling: Page Menu Commands Time Stretch Index [Source, Result] Page Sampling: Page Menu Commands Time Stretch Index [Source, Result, xxx(001090)/yyy(001090)]: Sensitivity [0030] 638 Crossfade Loop Pitch BPM Adjust Sampling: Page Menu Commands Destination (Audio CD Ripping) 639 Destination (Audio CD Ripping) Ripping to RAM memory Ripping to the disk Page 641 Global mode Global P0: Basic Setup 01: Basic 01a: Basic Master Tune [50cent (427.47Hz)+50cent (452.89Hz)] Velocity Curve [18] After Touch Curve [18] Global P0: Basic Setup 01: Basic 643 01b: Effect Global SW IFX112 Off [Off, On] MFX1&2 Off [Off, On] TFX1&2 Off [Off, On] System Clock [Internal, Word Clock, S/P DIF] Power On Mode [Reset, Memorize] Internal Headroom [Standard, +12dB, +24dB, +36dB, +48dB] S/P DIF Sample Rate [48kHz, 96kHz(Normal), 96kHz(Hi Enhanced)] Global P0: Basic Setup 01: Basic Knob/Slider Mode [Jump, Catch] Example: Switching to a combination in which timbre 01 Volume is set to 64 Beep Enable [Off, On] 646 Auto Optimize RAM [Off, On] 01e: Memory Protect Program [Off, On] Combination [Off, On] 02: Audio Input 02a: Audio Input PLAY/MUTE [(Off, On)] SOLO ON/OFF Global P0: Basic Setup 02: Audio Input 649 BALANCE AUDIO OUTPUT (MAIN) (INDIVIDUAL) Global P1: MIDI 11: MIDI 11a: MIDI Setup Basic MIDI Channel (Global MIDI Channel) [116] MIDI received MIDI output when playing OASYS Local Control On [Off, On] Local Control and the Control Surface Local Control and the Control Surface: more detail 652 Convert Position [PreMIDI, PostMIDI] Note Receive (Note Receive Filter) [All, Even, Odd] MIDI Clock MIDI Clock (MIDI Clock Source) [Internal, External MIDI, Auto] 653 Receive Ext. Realtime Commands [Off, On] 11b: MIDI Routing Setup Vector MIDI Out [Vector Joystick, Vector CC Control] Pads MIDI Out [Pad CC/Note, Chord Notes] 654 KARMA External Routing Enable KARMA Module to MIDI Out [Off, On] Enable MIDI In to KARMA Module [Off, On] Example settings 655 11c: MIDI Filter Bank Change [Off, On] Combination Change [Off, On] Enable Control Change [Off, On] 12: External 1 12a: External Mode Setup Global P1: MIDI 12: External 1 657 12b: Knobs/Switches/Sliders CC# Assign (18) [Off, 00119] MIDI Channel (116) [116, Gch] CC# Assign (116) [Off, 00119] 13: External 2 13a: Setup select 13b: Pads 18 Assign (18) [Off, C-1G9, CC#00119] Velocity (18) [1127] Global P2: Controller/Scale 21: Controller 21a: Foot Switch & Pedal/Damper Foot Switch Assign [OffSW 2] Foot Pedal Assign [OffKnob 4] Damper Polarity [() KORG Standard, (+)] 22: User Scale Global P2: Controller/Scale 22: User Scale 661 22a: User Octave Scale User Octave Scale [User Octave Scale 0015] 22b: User All Notes Scale 662 Global P3: Category Name 31: Program Category 31a: Main Categor y Main Category 0017 Main Category Edit [(Text Editor)] 31b: Sub Categor y 32: Combi Category 33: KARMA Category 664 Global P4: Wave Sequence Rhythmic Wave Sequences Crossfading Wave Sequences Velocity-Switching Wave Sequences 41: Sequence Parameters Global P4: Wave Sequence 41: Sequence Parameters = (Tempo) [040.00240.00 BPM] Run [Off, On] Key Sync [On, Off] Swing [300%+000+300%] 666 How Quantize Triggers works 41b: Graphic Step [164] Multisample (Read-Only) [Bank, Number, and Name] Global P4: Wave Sequence 41: Sequence Parameters Loop End Step [164] Direction [Forwards, Backwards/Forwards, Backwards] Repeat Times [Off, 1127, INF] Note-On Advance [Off, On] 668 41d: Modulation Position Intensity [63+63] Position modulation and loops Duration 42: Per-Step Parameters 42a: Basic 42b: Graphic 670 42c: Step parameters Type [Multisample, Rest, Tie] Multisample Select [List] Bank (Multisample) [ROM monoEXs stereo] 671 Xfade [0ms10 sec] Fade-Out Shape [Off, Log, -126-1, Linear, +1126, Exp] Fade-In Shape [Off, Log, -126-1, Linear, +1126, Exp] AMS Output 1 [0127] Exp/Comp (Mode = Time) Expand/Compress [%] [0100,000] /2 (Mode = Tempo) x2 (Mode = Tempo) Global P5: Drum Kit 51: Sample Setup Global P5: Drum Kit 51: Sample Setup 51a: Drum Kit, Key Select, Assign Drum Kit [INT00USERG15] KEY [C1G9] 674 Assign [Off, On] 51b: Drumsample DS1 (High): (Drumsample1 High) DS1(High) On/Off [Off, On] Global P5: Drum Kit 51: Sample Setup RAM mono, RAM stereo Select menu ROM and EXs samples RAM samples Level (Amp Level) [99+99] 676 DS2(Mid Hi): (Drumsample2 Mid High) DS3(Mid Lo): (Drumsample3 Mid Low) DS4(Low): (Drumsample4 Low) Global P5: Drum Kit 52: Sample Parameters 677 52: Sample Parameters 52a: Drumsample Parameters DS1 (High): (Drumsample 1 High) DS1(High) On/Off [Off, On] Filter Cutoff [64+63] Resonance (Filter Resonance) [64+63] 53: Voice Assign/Mixer 53a: Voice Assign Mode Exclusive Group (Exclusive Assign)[Off, 001127] Enable Note On Receive [Off, On] Enable Note Off Receive [Off, On] Global P5: Drum Kit 53: Voice Assign/Mixer 680 Global P6: Plug-in Info 61a: Public ID Public ID [nn nn nn nn nn nn nn nn] 61b: Installed Plug-ins Get Info button Global P6: Plug-in Info 53: Voice Assign/Mixer Purchasing plug-in licenses from your Korg distributor Authorizing plug-ins on the OASYS 682 Global: Page Menu Commands Write Global Setting Set Program User-Bank Type Change all bank references Touch Panel Calibration 683 Half Damper Calibration Pad Calibration LCD Setup 684 Update System Software Expansion Sample Setup Display Public ID Global: Page Menu Commands Dump Program 685 Dump Program Dump Combination Dump Drum Kit Dump Wave Sequence 686 Receiving SysEx data dumps Data dump reception procedure Set Up KARMA External MIDI Routing Global: Page Menu Commands Reset External Setup 687 Reset External Setup Reset Controller MIDI Assign 688 Copy Scale Write Wave Sequence Global: Page Menu Commands Write Drum Kit 689 Write Drum Kit Copy Key Setup Swap Key Setup Page 691 Disk mode Files, directories, and icons Files that can be loaded Disk P0: File 01: Load 693 Disk P0: File 01: Load Mounting USB devices Auditioning sounds from disk Auditioning Drum Kits and Wave Sequences Auditioning WAVE les 694 Drive types Volume label Multiple Select [Off, On] Open 02: Save Mounting USB devices 696 File date and time 03: Utility 03: Page Menu Commands Disk P0: File 09: Media Information 697 09: Media Information 09a: Media Information Drive Select 698 Disk P1: Audio CD 11: Make Audio CD What is Finalize? 11a: Track, Total, Free Track (Track Select) [0199, --] Total [00:00] 699 11b: Audio CD Track List Track [(0199)] WAVE File Size, Rate, Time 12: Play Audio CD 12a: Audio CD Play Location [(00:00.0)] Drive Select Track [01] 701 LEFT RIGHT Bus Select (IFX/Indiv.) 19: Media Information Disk: Page Menu Commands Hide unknown files 703 Disk: Page Menu Commands Hide unknown les Translation Lock/Unlock selected Load selected Page Load Programs Load Program Bank [Bank INT-AINT-F, Bank USER-AUSER-G] Load a Program Load Combinations Load Combination Bank [Bank INT-AINT-G, Bank USER-AUSER-G] Load a Combination Load Drum Kits Load Drum Kit Bank [INT, USER-AUSER-G] Load a Drum Kit Load Wave Sequences Load Wave Sequence Bank [INT, USER-AUSER-G] Load a Wave Sequence Load Global Setting Load .SNG Load a Song Load Tracks Load Pattern Data Load Regions Load a Region Load .KFX Load All Presets (P01P15) Load All Presets (U00U15) Load Presets (P0115) 27) Load a Preset (U) Load Standard MIDI File Load and Transmit MIDI SysEx Data Load .KCD Loading sample data KMP les KSF les Loading multiple les at once Load .KSC Load .KMP Load .KSF Loading AIFF les and WAVE les Load .AIF Load .WAV Loading AKAI S1000/S3000 format Sample les, Program les, or Volumes Load AKAI Sample File Akai S1000/S3000 Loop Conversion Load AKAI Program File Load AKAI Volume Load PCG (RAM) and Samples Content that will be loaded from the .PCG le Numbers that will be reassigned after loading so that data references correspond correctly: 716 Cautions regarding Save If the data being saved does not t on one volume of media Disk: Page Menu Commands Save All (PCG, SNG and KSC) 717 Save All (PCG, SNG and KSC) 718 Save PCG & SEQ Save PCG Save SEQ Save Sampling Data 719 Save to Standard MIDI File 720 Save Exclusive Save Effect Preset Export Samples as AIF/WAV Disk: Page Menu Commands Save Audio CD Track List 721 Save Audio CD Track List Rename Copy 722 Delete Delete Unused WAV Files Disk: Page Menu Commands Create Directory 723 Create Directory Set Date/Time Format Convert to ISO9660 Format 724 Rate Convert Check Medium Scan device Swap Track 725 Write to CD Finalize Audio CD Erase CD-RW Page 727 Effect Guide About effects resources Background information Effect/EXi Fixed Resource Meter FX Effects in each mode Combination, Sequencer mode Overview Dynamic modulation (Dmod) and Tempo Synchronization 729 Audio Input Dynamic modulation (Dmod) and Tempo Synchronization Dynamic modulation (Dmod) Tempo Synchronization Synchronizing LFOs Synchronizing Delay Times Common FX LFOs FX Control Buses Vocoder Compressor, limiter, and gate effects Example: Gated Reverb (Program mode) 731 Example: Compressor (Combination) Example: Vocoder (Program) 732 Example: Rhythmic Vocoder (Combination) Effect I/O Overview Effect I/O Insert Effects (IFX1IFX12) MonoMono Parallel Effects Example: IFX1: 148: P4EQ // Phaser Settings for drum programs Page Page 738 Drum Programs in Combination and Sequencer modes Drum Kit IFX Patch Page Page 742 Audio Input, S/P DIF IN 743 Audio CD Disk mode 744 Pan (CC#8) Bus Sel. (Bus Select) Insert Effects (IFX1IFX12) Controlling the Insert Effects via MIDI 745 Controlling the Insert Effects via MIDI Combination mode 746 Sequencer mode Master Effects (MFX1, 2) In/Out Master Effects (MFX1, 2) MonoMono Parallel Send level Master Effects (MFX1, 2) Routing 750 Audio Input, S/P DIF IN Master Effects (MFX1, 2) Mixer 751 Audio CD Disk mode Return1, Return2 Chain check box Controlling the Master Effects via MIDI Total Effects (TFX1, 2) In/Out Total Effects (TFX1, 2) MonoMono Parallel 754 Master Volume Using MIDI to control the Total Effects Outputs Main Outputs Outputs Main Outputs Individual Outputs Effect/Mixer Block Diagrams Program mode Effect / Mixer Block Diagram in Program Mode Effect/Mixer Block Diagrams Individual Outputs Combination mode, Sequencer mode Effect / Mixer Block Diagram in Comination/Sequencer Mode Sampling mode Effect / Mixer Block Diagram in Sampling Mode 759 Examples of the effect graphics Here are some examples of the effects that display graphics. 012: Stereo Graphic EQ Parametric EQ/EQ 760 Xover Filters 761 002: Stereo Compressor 003: Stereo Expander 762 Multiband Limiter 010: Stereo Noise Reduction The Multiband Limiter is used in 006: Multiband Limiter and 007: Stereo Multiband Limiter. 008: Stereo Master Limiter 763 Gate is used in 009: Stereo Gate and in 140: Reverb Gate. 004: St Multiband Compressor Dynamics 000: No Effect 001: Stereo Dyna Compressor Select [L/R Mix, L/R Individually] Sensitivity [1100] Dynamics 002: Stereo Compressor 002: Stereo Compressor Select [L/R Mix, Left, Right, L/R Individually] Detection Mode [RMS, Peak] EQ On [Check-box] Type[Low Pass, Band Pass, High Pass, Band Reject] 003: Stereo Expander Dynamics 004: St.Multiband Compressor 767 EXPANDER Ratio [1.0 :110.0 :1] 004: St.Multiband Compressor Slope [6dB Oct, 12dB Oct, 18dB Oct, 24dB Oct] Frequency 1-2 [Hz] [40240] Frequency 2-3 [Hz] [1006.00k] Frequency 3-4 [Hz] [2.00k16.00k] 005: Stereo Limiter Select [L/R Mix, L Only, R Only, L/R Individually] Dynamics 006: Multiband Limiter Side PEQ On [Check-box] Fc [Hz] [2012.00k] 006: Multiband Limiter Threshold Offsets 770 LOW MID 007: Stereo Multiband Limiter LOW MID HIGH 008: Stereo Mastering Limiter 009: Stereo Gate FX Control 2] Dmod Control [OffTempo] Select [L/R Mix, L Only, R Only] 772 010: Stereo Noise Reduction Envelope Source[Input, FX Control 1, FX Control 2] Envelope Select [L/R Mix, Left, Right] NOISE REDUCTION Trigger Monitor [Check-box] EQ and Filters 011: Stereo Parametric 4EQ D Band1 Type [Peaking, Shelving-Low] Band4 Type [Peaking, Shelving-High] Band1 Fc [Hz] [201.00k] 012: Stereo Graphic 7EQ GRAPHIC EQ 013: Stereo Master 3EQ GAIN MOD EQ and Filters 014: Stereo Exciter/Enhncr 014: Stereo Exciter/Enhncr Emphasis Frequency [070] Amount [70+70] Blend [+/100] ENHANCER 016: Stereo Wah/Auto Wah EQ and Filters 017: St. Vintage/Custom Wah 777 MIDI/Tempo Sync LFO Type 017: St. Vintage/Custom Wah 018: Stereo Random Filter 779 FILTER Waveform and Phase MIDI/Tempo Sync Step LFO type 019: Multi Mode Filter MULTIMODE FILTER DRIVER EQ and Filters 020: Stereo Sub Oscillator 781 020: Stereo Sub Oscillator Pre LPF [1100] Sensitivity [0100] SUB OSCILLATOR OSC Mode [Note (Key Follow), Fixed] 021: Talking Modulator Sweep Mode [Dmod, LFO] Manual Voice Control [Bottom, 149, Center, 5199, Top] TALKING MODULATOR Voice Top [A, I, U, E, O] 022: Stereo Decimator 784 023: Stereo Analog Record ANALOG RECORD NOISE CLICK 024: Stereo Wave Shaper EQ and Filters 024: Stereo Wave Shaper Pre LPF [0100] Scale [dB] [36+36] Amount [72+72] Output Level [0100] 025: Piano Body/Damper SOUND BOARD DAMPER TONE Tone [1100] 787 CARRIER Noise Level [0100] MODULATOR Select [L/R Mix, L Only, R Only] Overdrive, Amp models, and Mic models 027: OD/Hi-Gain Wah Wah Switch Wah Sweep 028: OD/HyperGain Wah 790 029: Stereo Guitar Cabinet 030: Guitar Amp Model +P4EQ GUITAR AMP MODEL Overdrive, Amp models, and Mic models 031: Guitar Amp Model +Cabinet 791 031: Guitar Amp Model +Cabinet GUITAR AMP MODEL Type [See Below] Gain [0100] Volume [0100] 032: Stereo Bass Cabinet 033: Bass Amp Model GOLD PANEL, SCOOPED, VALVE2, VALVE, CLASSIC] Volume [0100] 034: Bass Amp Model +Cabinet 794 Recommended Combinations of Bass Amp Models and Cabinets 035: Bass Amp TubeDrive +Cab Recommended Combinations of Bass Amp Models and Cabinets Overdrive, Amp models, and Mic models 036: Tube PreAmp Modeling 795 036: Tube PreAmp Modeling TUBE PREAMP1 Gain [dB] [Inf, 38+24] Phase [Normal, Wet Invert] TUBE PREAMP2 039: St. Mic Modeling +PreAmp 797 Chorus, Flanger, and Phaser 040: Stereo Chorus CHORUS 798 041: Stereo Harmonic Chorus CHORUS 042: St. Bi-phase Modulation 799 MODULATION 043: Multitap Cho/Delay 4Taps 800 Taps 1-4 Tap 14 [msec] [01000] Depth 14 [030] 044: Multitap Cho/Delay 6Taps MODULATION DELAY Taps 1-6 Tap 16 [msec] [02000] Depth 16 [030] Status 16 [Always On, Always Off, OnOff (Dmod), OffOn (Dmod)] 045: Bi Chorus CHORUS1 CHORUS2 802 MODE 046: Ensemble ENSEMBLE 803 047: Polysix Ensemble POLYSIX ENSEMBLE 048: Stereo Flanger 804 1:99, 049: Stereo Random Flanger Delay Time [msec] [0.050.0] OUTPUT Wet/Dry [Wet Dry, 1: 99Wet] 050: Stereo Envelope Flanger 051: Stereo Phaser 052: Stereo Random Phaser 807 053: Stereo Envelope Phaser EG 054: Bi Phaser 808 PHASER2 MODE 809 Modulation and Pitch Shift 055: Stereo Vibrato AUTOFADE VIBRATO 810 056: Stereo Auto Fade Mod. AUTOFADE Modulation and Pitch Shift 057: 2-Voice Resonator 811 057: 2-Voice Resonator Control Mode [Manual, LFO, Dmod] LFO/Dmod Invert [Check-box] Modulation Depth [+/100] Common LFO Phase Offset [degrees] [180+180] 058: Doppler DOPPLER Pitch Depth [0100] Pan Depth [+/100] Mode [Loop, 1-Shot] 059: Scratch RECORD Envelope Select [Dmod, Input] PLAYBACK Scratch Source [OffTempo] 061: Stereo Tremolo 062: Stereo Envelope Tremolo 063: Stereo Auto Pan Waveform [Triangle, Sine] Phase [degrees] [180+180] 064: Stereo Phaser+Tremolo 818 065: Stereo Ring Modulator RING MODULATOR 819 066: Stereo Frequency Shifter FREQUENCY SHIFTER 067: Detune Pitch Shift [cents] [+/100] Delay Time [msec] [01000] 068: Pitch Shifter Delay Time [msec] [02000] 069: Stereo Pitch Shifter L/R Pitch [Normal, Up/Down] L Delay Time [msec] [02000] R Delay Time [msec] [02000] Spread [+/100] 070: Pitch Shifter BPM Time Over?> [---, OVER!] Base Note [ 071: Stereo Pitch Shifter BPM 072: Pitch Shift Mod. 824 073: Organ Vibrato/Chorus PRESET CUSTOM Modulation and Pitch Shift 074: Rotary Speaker Speed [Hz] [0.0220.00] 074: Rotary Speaker Mode Switch [Rotate, Stop] Speed Switch [Slow, Fast] Manual Speed [OffTempo] Ratio [Stop, 0.502.00] 075: Rotary Speaker Pro OD OVERDRIVE Switch [Off, On] Gain [0100] Tone [015] 076: Rotary Speaker Pro CX Mode Switch [Rotate, Stop] Speed Switch [Slow, Fast] Fast Overrides Stop [Check-box] Horn Stop Phase [degrees] [Free, 180+180] 828 Balance and Tone Delay 077: L/C/R Delay 078: L/C/R Long Delay 079: Stereo/Cross Delay Delay 080: Stereo/Cross Long Delay 080: Stereo/Cross Long Delay Stereo/Cross [Stereo, Cross] L Delay Time [msec] [0.0] 2730.0 R Delay Time [msec] [0.0] 2730.0 L Feedback [+/100] 082: Stereo Modulation Delay Delay 083: Stereo Dynamic Delay L Delay Time [msec] [0.01000.0] R Delay Time [msec] [0.01000.0] L Depth [0200] 083: Stereo Dynamic Delay Target [None, Output Level, Feedback] Polarity [+, ] Offset [0100] L Delay Time [msec] [0.01360.0] 084: Stereo Auto Panning Delay 835 085: Tape Echo WOW & FLUTTER TAPE ECHO Delay Time Level and Pan 13 Feedback 086: Multiband Mod. Delay Dmod BAND1 DELAY BAND2 DELAY BAND3 DELAY 087: Reverse Delay REVERSE DELAY Reverse Time [msec] [0900] L Post-Delay Time [msec] [0900] Time [msec] [0900] 088: Hold Delay REC CONTROL Manual Rec Control [Check-box] RESET CONTROL Manual Reset Control [Check-box] 089: Auto Reverse Envelope Select [Dmod, Input] REVERSE Mode [Single, Multi] 090: Sequence BPM Delay 091: L/C/R BPM Delay 092: L/C/R BPM Long Delay Time Over?> [---, OVER!] L Delay Base Note [] C Delay Base Note [] R Delay Base Note [] 094: Stereo BPM Long Delay 095: Stereo BPM Multitap Delay 096: Stereo BPM Mod. Delay 097: St. BPM Auto Panning Dly Delay 098: Tape BPM Echo 847 098: Tape BPM Echo Pre Tone [0100] WOW FLUTTER Frequency [Hz] [0.021.00] TAPE ECHO Delay Time 099: Reverse BPM Delay REVERSE DELAY Reverb and Early Reflections 100: Overb 849 Reverb and Early Reections 100: Overb Band 1 Band1 [Check-box] Fc [Hz] [20020.00k] Band 2 101: Reverb Hall 102: Reverb Smooth Hall 103: Reverb Wet Plate 104: Reverb Dry Plate Reverb Time [sec] [0.110.0] 105: Reverb Room 106: Reverb Bright Room Reverb Time [sec] [0.13.0] Pre Delay Thru [%] [0100] ER Level [0100] 107: Early Reections EARLY REFLECTIONS Type [Sharp, Loose, Modulated, Reverse] ER Time [msec] [10800] 108: Early Reections Hi Dens Page 854 Mono-Mono Serial 109: P4EQ - Exciter 110: P4EQ - Wah P4EQ 111: P4EQ - Chorus/Flanger 112: P4EQ - Phaser 113: P4EQ - Multitap Delay 114: Comp - Wah Routing [Comp Wah, Wah Comp] Pre LEQ Gain [dB] [15+15] Pre HEQ Gain [dB] [15+15] Sensitivity [0100] 116: Comp - OD/HiGain 117: Comp - P4EQ 118: Comp - Chorus/Flanger 119: Comp - Phaser 120: Comp - Multitap Delay 121: Limiter - P4EQ 122: Limiter - Chorus/Flanger 123: Limiter - Phaser 124: Limiter - Multitap Delay 125: Exciter - Comp 126: Exciter - Limiter 127: Exciter - Chorus/Flanger 128: Exciter - Phaser 129: Exciter - Multitap Delay Mono-Mono Serial 130: OD/Hi Gain - Amp Sim 130: OD/Hi Gain - Amp Sim Routing [OD/HG Amp, Amp OD/HG] Drive Mode [Overdrive, Hi-Gain] Drive [1100] Output Level [050] 132: OD/Hi Gain - Phaser 133: OD/Hi Gain - Multitap Dly 134: Wah - Amp Sim 135: Decimator - Amp Sim 136: Decimator - Comp 137: Amp Sim - Tremolo Amplier Type [SS, EL84, 6L6] Waveform [Triangle, Sine, Vintage, Up, Down] 138: Cho/Flanger - Multitap Dly LEQ Gain [dB] [15+15] 139: Phaser - Chorus/Flanger 140: Reverb - Gate 877 Mono/Mono Parallel 4 band EQ Page 879 Multi-tap BPM Delay MT DELAY Tap2 Base Note [] Tap1 Level [0100] 141: P4EQ // P4EQ 142: P4EQ // Comp 143: P4EQ // Limiter Mono/Mono Parallel 144: P4EQ // Exciter 144: P4EQ // Exciter 145: P4EQ // OD/Hi Gain 146: P4EQ // Wah 147: P4EQ // Chorus/Flanger 148: P4EQ // Phaser 149: P4EQ // Multitap BPM Dly 150: Comp // Comp 151: Comp // Limiter Mono/Mono Parallel 152: Comp // Exciter 152: Comp // Exciter 153: Comp // OD/Hi Gain 154: Comp // Wah 155: Comp // Chorus/Flanger 156: Comp // Phaser 157: Comp // Multitap BPM Dly 158: Limiter // Limiter 159: Limiter // Exciter Mono/Mono Parallel 160: Limiter // OD/Hi Gain 160: Limiter // OD/Hi Gain 161: Limiter // Wah 162: Limiter // Chorus/Flanger 163: Limiter // Phaser 164: Limiter // Mtap BPM Dly 165: Exciter // Exciter 166: Exciter // OD/Hi Gain 167: Exciter // Wah Mono/Mono Parallel 168: Exciter // Chorus/Flanger 168: Exciter // Chorus/Flanger 169: Exciter // Phaser 170: Exciter // Mtap BPM Dly 171: OD/Hi Gain // OD/Hi Gain 172: OD/Hi Gain // Wah 173: OD/Hi Gain // Cho/Flanger 174: OD/Hi Gain // Phaser 175: OD/Hi Gain // Mt BPM Dly 176: Wah // Wah 177: Wah // Chorus/Flanger 178: Wah // Phaser 179: Wah // Multitap BPM Dly 180: Cho/Flange // Cho/Flanger 182: 181: Cho/Flange // Phaser Cho/Flange // Mt BPM Dly 183: Phaser // Phaser 184: Phaser // Mtap BPM Dly 185: Mt.BPM Dly // Mt.BPM Dly Page KARMA GE guide About the KARMA GE guide Illustrations in the GE guide How to read the GE Guide How GE parameter names are displayed Env: parameter name [Env] #No. #No. #No. Drum: parameter name [Pat] About KARMA Overview About KARMA Theory Of Operation KARMA Architecture (Diagram) GE Combination/Sequencer: KARMA Module A/B/C/D (Generated Effect) KARMA Module GE (Generated Effect) Group GE Global Parameters GE Type [03] Gate Type [04] 898 25: CC - 4 different CC Gate Types Gate CC Number [1, 0127] Force Mono [0, 1] GE (Generated Effect) Group GE Global Parameters Note Series Group Parameters Note Type [09] Note Series Group Parameters Input Sort [04] Input Transpose [48+48] Inversion [24+24] Replications [04000] 0: Off 1: On Interval [24+24] Chord Shift [02] Wrap Bottom [0127] Wrap Top [0127] Note Series Group Parameters Filter Template [077] Filter Temp + Restore [177] About Filter Steps Phase Group About Phase Patterns Total Steps [032] Start % [0100 (%)] Start Mode [03] Phase Group General Parameters Length Mode [02] Cycle Mode [03] Phase Specic Parameters Direction [0, 1] Phase Transpose [36+36 (semitones)] Octave Phs. Transpose [36+36] Oct/5th Phs. Transpose [36+36] End Loop Parameters End Loop On/Off [0, 1] End Loop Start Step [117] End Loop Length [196] Pattern Parameters Template Steps 1316 Step Transpose Value [480+48] Step Transpose On/Off [0, 1] Step Transp. Template [017] Rhythm Group Overview Rhythm Group About Rhythm Patterns Humanize [0255 (ms)] Swing Note Value [03] Swing % [-200200 (%)] Swing Use Multiplier [03] Rhythm Pattern Rhythm Group Random Weighting Parameters - Pools Random Weighting Parameters - Pools Random Weighting Parameters - Ties Ties-Random Factor [99+99] Ties-Weighting Curve [0, 1] Rhythm Multiplier [1800 (%)] Straight Multipliers [05] Straight/Trip Mults [010] Strt/Dot/Trip Mults [015] Rhythm Group Associated Parameters Template + Restore [0: [As Stored]63] Duration Group About Duration Patterns Duration Pattern Duration Mode [07] Duration Group Associated Parameters Duration Value [500+5000] Use Rhythm Multiplier [0, 1] Random Weighting Parameters - Pools Random Weighting Parameters Ties Ties-Random Factor [99+99] Ties-Weighting Curve [0, 1] Template + Restore [0: [As Stored]63] Index Group About Index Patterns Index Pattern Index Mode [02] Random Walk Max Step [19] Index Group Associated Parameters Invert [0, 1] Double [0, 1] Double Amount [012] Inv/Dbl Vel. Offset [0200%] Page Cluster Group Overview Cluster Group About Cluster Patterns Strum [01000 (ms)] Cluster Pattern Page Velocity Group Overview Velocity Group About Velocity Patterns Velocity Mode [02] Velocity Value [1127] Velocity Range Bottom [1127] Velocity Range Top [1127] Randomize Bottom [12+12] Randomize Top [12+12] Velocity Pattern Pools-Random Factor [99+99] Velocity Group Associated Parameters Scale [999+999 (%)] CCs/Pitch Group About CC/Bend/Pitch Patterns CC Pattern Associated Parameters Fixed On [0128] CCs/Pitch Group Random Weighting Parameters CC Mode [05] Polarity [0, 1] Pitches-Random Factor [99+99] Pitches-Weighting Curve [03] Octaves-Random Factor [99+99] Octaves-Weighting Curve [03] CC-A [1126] CC-B [1126] Pitch Offsets On/Off [0, 1] P.Offset Chord Shift [02] CCs/Pitch Group Associated Parameters WaveSeq Group About WaveSeq Patterns Wave Pattern On/Off [0, 1] Oscillator Mode [04] WaveSeq Group Pattern Grid & Associated Parameters Row 116 Waveform [0002261] Row 116 Start Offset [08] Waveform Type [0, 1] Waveform Offset [999999] Keyboard Track (C2) [0, 1] Pattern Length [132] Page Envelope Group About Envelopes Parameters On/Off (Envelope On/Off) [0, 1] Envelope Type [0127] Envelope Group Parameters Start Level [099] Attack Time [099] Attack Level [099] Decay Time [099] Sustain Level [099] Release Time [099] Release Level [099] Amplitude Amount [099] Level Combinations Time Combinations Page Repeat (Melodic Repeat) Group Overview Repeat (Melodic Repeat) Group Rhythm [025] Straight Rhythms [011] Dotted Rhythms [08] Triplet Rhythms [08] Selected Rhythms [013] Selected Rhythms2 [018] Use Swing [0, 1] Repeat (Melodic Repeat) Group General Parameters Stop Mode [03] Rebound Mode [02] Tempo Env. Lock [0, 1] Range Parameters Range Mode [03] Range Bottom (Abs) [0127: C-1G7] Range Top (Abs) [0127: C-1G7] Range Bottom (Rel) [64+63 semitones] Range Top (Rel) [64+63 semitones] Vel. Range Bottom [1127] Vel. Range Top [1127] GE Mode = Real-Time Parameters Duration Mode (RT) [04] Duration Value (RT) [25000 (ms)] Key Mode (RT) [0, 1] Chord Quantize (RT) [0, 1] When Key Mode (RT) is 1: Up Bend Group Overview Bend Group On/Off [0, 1] Amount [1218] Force Bend If Zero [0, 1] Shape [02] Alternation [0, 1] Step Mode [012] Length [025] GE Mode = Real-Time Parameters Key Mode (RT) [0, 1] Direction (RT) [0, 1] Rel. Delay Length (RT) [024] Rel. Delay Damping (RT) [0, 1] Vel. Range Bottom (RT) [1127] Vel. Range Top (RT) [1127] Drum Group Overview Drum Group About Drum Patterns Pattern Editing Grid & Associated Parameters Drum Pattern Play On/Off [0, 1] On/Off Combinations [07] Row17 Note [0127] Row17 Vel. Offset [127+127] Rhythm Multiplier [1800 (%)] Random Weighting Parameters Pools Random Weighting Parameters Rests Rests-Random Factor [99+99] Rests-Weighting Curve [0, 1] Pools/Poly [0, 1] Drum Group Associated Parameters Keyboard Track [0, 1] NTT On/Off (Note Table Transposition) [0, 1] Link To Next [0, 1] Notes Played = Rows [0, 1] Resync Index Templates [1: As Stored, 013] Page Direct Index Group Index Shift [03] Trill Mode [05] Direct Index Group Duration Parameters Held Note Trig Mode [03] Duration Parameters Duration Control [02] Duration Mode [03] Duration ms [15000 (ms)] Repeat Parameters Melodic Rpt On/Off [0, 1] Bend Parameters Bend On/Off [0, 1] Bend Amount [1218] Direct Index Group Bend Parameters Bend Shape [02] Bend Alternation [0, 1] Bend Step [0, 1] Bend Length [025] Appendices Using Auto-Bend Next Note/Previous Note Bends Generated Real-Time Length Of Bends GE Type 0: Generated-Riff, 1: Generated-Gated or 2: Generated-Drum Appendices Random Weighting Curves Random Weighting Curves Weighting Curve Shapes and Their Effects Page Appendices Random Weighting Curves Comparison of Exponential and Logarithmic Curves With a Positive Factor (+40): With a Negative Factor (-40): 965 Appendices Alternate Modulation Sources (AMS) Alternate Modulation Overview Alternate Modulation Sources AMS Mixers Filter1 A Amp 1 Alternate Modulation - EXi AL-1 Analog Synthesizer Type Driver LFO3 LFO4 Ring Mod Noise MIXER AMS (Alternate Modulation Source) List Physical and MIDI controllers Note Number Velocity Exponential Velocity Knob Mod.8 (CC#21) Knob Mod5 [+] (CC#17) Knob Mod6 [+] (CC#19) Knob Mod7 [+] (CC#20) Knob Mod8 [+] (CC#21) 969 Tempo Gate1 and Gate1+Damper Gate2 and Gate2+Damper HD-1 970 EXi CX-3 EXi STR-1 EXi MS-20EX EXi PolysixEX Alternate Modulation settings HD-1 AMS 972 The effects of AMS on various parameters, and example applications Pitch (Program 22a) Pitch EG Intensity (Program 22b) Pitch LFO 1/2 Intensity (Program 22c) Output Level (Program 31b) Filter EG Intensity (Program 32b) Filter LFO1/2 Intensity (Program 33a) Filter Common LFO1/2 (Program 33b) Driver Drive (Program 41a) Driver Low Boost (Program 41a) Pan (Program 41c) EG Reset Pitch EG (Program 29a) Filter EG (Program 34a) Amp EG (Program 43a) EG Level Pitch EG (Program 29c) Filter EG (Program 34c) Amp EG (Program 43c) EG Time Pitch EG (Program 29d) Filter EG (Program 34d) Amp EG (Program 43d) LFO Frequency (Program 51a) Page Dynamic Modulation Sources (Dmod) Dmod and MIDI Dynamic Modulation Source List D Dynamic Modulation Sources (Dmod) Dynamic Modulation Source List Gate1, Gate1+Damper Gate2, Gate2+Damper Exponential Velocity Foot Pedal (CC#04) Page Controller Assignments SW1/2 Assignments 979 Controller Assignments SW1/2 Assignments List of SW 1/2 assignments SW1 Mod. (CC#80) and SW2 Mod. (CC#81) Portamento SW (CC#65) Octave Down Realtime Knobs 58 Assignments Knobs and MIDI CCs List of Knob 5-8 assignments Knob Mod. 58 (CC#s17, 19, 20, 21) Master Volume Foot Switch Assignments List of Foot Switch assignments 982 Foot Pedal Assignments List of Foot Pedal assignments Page 984 Dynamic MIDI Sources & Destinations Dynamic MIDI Sources Controller Group: JS+Y (CC#01) JS-Y (CC#02) Pedal (CC#04) 985 VJS +X Mod. (CC#85) VJS -X Mod. (CC#86) VJS +Y Mod. (CC#87) VJS -Y Mod. (CC#88) Dynamic MIDI Destinations RT Parms Control [Momentary, Toggle, Tempo [Momentary, Toggle, Continuous] Note/Env Latch [Momentary, Toggle] Dynamic MIDI Sources & Destinations Dynamic MIDI Destinations Examples of use Auto Transpose On/Off [Momentary] Auto Transpose Range [Continuous] Examples of use Module Stop & Repeat Stop [Momentary] Module Pause [Momentary, Toggle] Chord Scan [Continuous] Smart Scan [Continuous] Dynamic MIDI Sources & Destinations Dynamic MIDI Destinations Clock Advance [Momentary, Toggle, Continuous] Examples Trigger Notes & Envs [Momentar y, Toggle, Direct Index [Continuous] Direct Index 1 Way [Continuous] Dir.Idx 1 Way & Mdl Stop [Continuous] BufferLatch [Momentary, Toggle] Example MIDI transmission when the OASYSs controllers are operated Dynamic MIDI Destinations MIDI transmission when the OASYSs controllers are operated Page MIDI transmission when the OASYSs controllers are operated Dynamic MIDI Destinations 993 Fixed assignments Combination mode Sequencer mode Page OASYS and MIDI CCs Responses to standard MIDI controllers OASYS and MIDI CCs Responses to standard MIDI controllers Page OASYS and MIDI CCs Responses to standard MIDI controllers 998 Parameters controlled by MIDI CCs #70-79 HD-1 OASYS and MIDI CCs Parameters controlled by MIDI CCs #70-79 999 AL-1 and STR-1 CX-3 MS-20EX 1000 PolysixEX MIDI applications About MIDI 1001 MIDI applications About MIDI Connecting MIDI devices & computers Controlling an external MIDI tone generator from the OASYS Controlling the OASYSs tone generator from an external MIDI device Controlling two or more external MIDI tone generators from the OASYS Messages transmitted and received by the OASYS MIDI channels Program mode and Sampling mode 1003 Note on/off Program Change/Bank Select Changing the program/bank Program mode 1004 After touch Channel aftertouch [Dn, vv] Polyphonic aftertouch [An, kk, vv] Pitch bend 1005 Modulation 2 depth (CC#02) [Bn, 02, vv] Controlling portamento Portamento time (CC#05) [Bn, 05, vv] Portamento switch (CC#65) [Bn, 41, vv] 1006 Post insert effect pan (CC#08) [Bn, 08, vv] Controlling effects Effect control 1 (CC#12) [Bn, 0C, vv] Effect control 2 (CC#13) [Bn, 0D, vv] Effect 1 depth (Send 2) (CC#91) [Bn, 5B, vv] Effect 3 depth (Send 1) (CC#93) [Bn, 5D, vv] 1007 Controller (CC#18) [Bn, 12, vv] Vector joystick modulation +X, X, +Y, Y [Bn, 55, vv], [Bn, 56, vv], [Bn, 57, vv], [Bn, 58, vv] Controller (CC#83) [Bn, 53, vv] Damper pedal (CC#64) [Bn, 40, vv] 1008 Vector control KARMA function control Pad 18 control 1009 Silencing all notes on a specic channel Resetting all controllers on a specic channel Using RPN (Registered Parameter Numbers) Tuning 1010 About system exclusive messages Universal system exclusive Transmitting sound settings data (Data Dump) 1011 Editing sounds via SysEx If notes are stuck Playing the OASYS multi-timbrally from an external device Synchronizing the playback of the KARMA function or sequencer 1012 Using the external MIDI device as master and the OASYS as slave Recording musical data from an external device Using the REALTIME KNOBS 18 to record MIDI control changes on an external MIDI Recording the KARMA function or RPPR function on an external MIDI 1013 Setting example 1 Setting example 2 About GM (General MIDI) About standard MIDI les MIDI Implementation OASYS MIDI IMPLEMENTATION 1.TRANSMITTED DATA Page Page MIDI Implementation Messages transmitted and received by the OASYS 1018 Error and conrmation messages A (ADCAre You Sure) ADC Overload B (Buffer) Buffer overrun error occurred Buffer underrun error occurred D (DestinationDisk) Destination and source are identical Destination from-measure within the limits of source Destination is empty Destination measure is empty E (ErrorExceeded) Error in formatting medium Error in reading from medium Error in writing to medium Exceeded 16 Programs 1021 File contains unsupported data File is read-only protected File name conicts File unavailable I (IllegalIndex) Illegal le description Illegal SMF data Illegal SMF division Illegal SMF format N (No dataNot enough song memory) No data No medium No recording track specied No space available on medium O (Obey copyright rulesOscillator) Obey Copyright Rules Oscillator Mode conicts (Check PROG P1) Error and confirmation messages P (PatternProgram) 1025 P (PatternProgram) Pattern conicts with events Pattern exists across destination to-end- of-measure or source from-measure Pattern exists in destination or source track - Open pattern? Pattern used in song - Continue ? T (The clockTrack) U (Unable to create directoryUSB Hub) W (Wave) 1028 Y (You) You cant undo this operation You cant undo last operation Disk mode information AIFF and WAVE format details: importing 1029 Disk mode information AIFF and WAVE format details: importing AIFF les Common chunk Sound Data chunk Marker chunk About KORG format les KORG format le structure KMP (KORG Multisample Parameter) les Disk mode information About KORG format files 1031 KSF (KORG Sample File) les 1032 KSC (Korg SCript) les Filename conventions Disk mode information CD-R/RW disks on the OASYS: UDF and packet-writing 1033 CD-R/RW disks on the OASYS: UDF and packet-writing About packet writing Compatible media Formatting Cautions when formatting 1034 KORG devices which support ISO9660 format (level 1) KORG devices which support UDF version 1.5 Divided les Troubleshooting converted CD-Rs Safety precautions Warnings Cautions Please note when installing an option board/memory Cautions when installing the calendar battery 1036 About option boards/memory/calendar battery EXB-DI (Digital interface board) DRAM DIMM Calendar battery Installing an option board/memory/calendar battery Opening and closing the front panel Opening the front panel Closing the front panel 1038 Installing the EXB-DI Installing memory Option boards/Memory/Calendar battery Installing an option board/memory/calendar battery Removing DRAM DIMMs 1040 Installing the calendar battery Press Tab Option boards/Memory/Calendar battery EXB-DI option 1041 EXB-DI option How audio outputs are related to ADAT output channels Example connections Digitally recording the sound of the OASYS to an ADAT Complex setup with a Digital Mixer, ADAT, and BRC Updating the system 1. Downloading the system le 2. Updating the system Using the included Restore CDs to restore the system and factory sounds EXB-DI option 1043 Using the included Restore CDs to restore the system and factory sounds Important - save your data before proceeding! Contents of the Restore CDs Restore CD 1/4 Restore CDs 2/4, 3/4, and 4/4 [ ] Restore OS and factory sounds [ ] Restore factory sounds [ ] Initialize Internal Memory [ ] Format HD, and then restore OS and factory sounds Re-authorizing OASYS Voice Name List Combinations INT-A INT-B INT-C Programs Bank INT-A [HD-1] Bank INT-B [HD-1] Bank INT-C [HD-1] Bank INT-D [HD-1] Bank INT-E [HD-1] EXs1 Bank INT-F [EXi] MS: MS-20EX, P6: PolysixEX, S: STR-1, A: AL-1, C: CX-3, -: Off Bank USER-D [EXi] LAC-1 S: STR-1, A: AL-1, -: Off S: STR-1, A: AL-1, -: Off Bank USER-E [EXi] Bank USER-F [EXi] Bank G / g(1)g(9) / g(d) Page Bank USER-A [HD1] EXs2 Drum Kits GM Drum Kits # Name KARMA GEs Category: Arpeggio Page Category: Melodic Page Category: Harmonic (Poly) Page Page Page Category: Chord Rhythmic Page Page Page Category: Strumming Category: Pick Category: Bass Pattern Page Page Category: Gated Category: Drum Page Page Page Page Page Page Page Page Page Category: Wavesequence Category: CC Category: Real-Time KARMA RTC Names Page External Setups 000: NI Pro53 003: FM7 (requires FM7 controller le) 001: Atmosphere 002: B4 004: Subtractor (Reason) 005: NNXT (Reason) 007: Redrum (Reason) 8-channel mixer 006: Dr.Rex (Reason) 008: Redrum (Reason) 8-channel Editor 009: Malstrom (Reason) 011: NN-19 (Reason) 010: Mixer (Reason) 012: Legacy MS-20 013: Legacy Polysix 015: USB Ultra Focus 014: NI Elektrik Piano 016: 8-channel MIDI Mixer Multisamples ROM mono Page Page Page ROM stereo EXs1 mono EXs1 stereo EXs2 mono EXs2 stereo Drumsamples ROM mono Page Page Page EXs1 mono Page Page Page Page EXs1 stereo Page These sounds Processed with INFINITY. Wave Sequences INT Preset Patterns Template Songs Demo Songs KORG INC. IMPORTANT NOTICE TO CONSUMERS