10
■Uninstalling KORG USB-MIDI Driver for
Windows XP
1From the task bar, choose [Start] ➔ [All Programs] ➔
[KORG] ➔ [USB MIDI Uninstall] to start up the setup
utility.
Click [Next >].
2A list of the currently-installed KORG MIDI devices will
appear.
Add a check mark only to the MIDI devices that you
want to remove.
Please note that all MIDI devices with a check mark will be
removed.
Click [Next >].
3A dialog box will ask you for confirmation. Click [Yes].
4Click [Finish] to complete the procedure.
Restart Windows so that your changes will take effect.
Mac OS X users■Operating requirements
Computer
Apple Macintosh computer with a USB port that satisfies
the operating requirements of Mac OS X
Supported operating systems
Mac OS X ver.10.2 or later
Proceed as follows to make your computer recognize the
padKONTROL.
1Use a USB cable to connect the padKONTROL to your
computer.
2Turn on the power of the padKONTROL.
3Navigate to Macintosh HD > Application folder > Utility
folder, and double-click “Audio MIDI Settings”.
4Click the “MIDI Devices” tab, and verify that the
padKONTROL is displayed.
■Mac OS X MIDI input and output ports
Using the Mac OS X MIDI drivers, the padKONTROL
provides a total of three MIDI inputs and two MIDI outputs,
as follows:
•One port each of MIDI input and output for external
devices
•Two ports of MIDI input from the padKONTROL’s own
trigger pads and controllers
•One port of MIDI output dedicated to padKONTROL data
dumps and Korg Native mode
padKONTROL MIDI OUT
padKONTROL MIDI IN
padKONTROL dedicated port(CTRL)
padKONTROL Port B(PORT B)
padKONTROL Port A(PORT A)