Korg iS40 Guide
the functions you would expect to find in a sophisticated sequencer! You can then save your sequences in Standard MIDI file format.
Disk/Global Mode
In Disk mode, you can save and load data via the internal DOS-compatible drive. When you press the DISK/GLOBAL button, the display will indicate the pages within this mode, and you can press the PAGE+/- buttons to move through the pages. The Global pages access tuning, MIDI and HOST port parameters, pedal and external controller (EC5) settings, Lower Memory, Velocity curves, as well as Chord Recognition, Auto Scan, Scales, and MIDI dump procedures. Joystick settings for pitch control of Upper1 and 2 sounds, WRITE GLOBAL, and Calibration procedures are also part of the Global mode pages.
Display Pages
Each of the parameters and functions of the various modes are grouped into pages and sub-pages in the display. The current page number is always in the right-hand side of the display. Use the PAGE+/- buttons to scroll through pages, and the CURSOR <> and ENTER/YES buttons to go to any associated sub pages.
Pro-User Tip:
You can direct-select specific pages by holding down a MODE button, followed by pressing one of the Arrangement or Program number buttons. For instance, pressing the ARRANGEMENT button, then pressing ARRANGEMENT NUMBER button 8 will take you to page 8 of Arrangement Play mode. Pressing PROGRAM NUMBER 1 will take you to page 9 of Arrangement Play mode. You can also re-configure these direct access pages so that the same type of page is accessed from the same button. (see manual page 19)
Listening to the Demo Songs
There are 16 ROM demos in the iS40. Here’s how to access them:
1.Press the ARR.PLAY and B.SEQ (DEMO) buttons together. The “Demo” page will appear in the display.
To listen to all the demo songs:
