Korg The iS40 manual Changing the Split Point

Korg iS40 Guide

4.Press and Hold the SPLIT POINT button, located to the left of the display in the MODE section. Look in the Display as you do this, and in the upper-right area, you’ll see “SPLIT” and “C4” below it. This is the current split point for Arrangement B66.

5.While Holding the SPLIT POINT button, press any key on the keyboard, and the Display will indicate the new selected split point. Release the SPLIT POINT button and play the keyboard to hear the new split.

6.Re-select Arrangement B66 again, to recall the original setup.

7.Start the arrangement by pressing START/STOP.

8.Press the LOWER button in the KEYBOARD ASSIGN section, and then play chords in the lower range. You’ll hear the “Lite Voices” program assigned to the lower split point. Play in the upper range to hear the “Dist Lead” sound.

Or:

Changing the Split Point:

1.Select Arrangement “A75 By on”. Again note that the UPPER1 button is lit. Also note that the SPLIT button is lit in the KEYBOARD MODE section, located above the PROGRAM section.

2.Without starting the arrangement, simply play notes in the lower and upper ranges of the keyboard.

3.Press and Hold the SPLIT POINT button, located to the left of the display in the MODE section. Look in the Display as you do this, and in the upper-right area, you’ll see “SPLIT” and “C4” below it. This is the current split point for Arrangement A75.

4.While Holding the SPLIT POINT button, press any key on the keyboard, and the Display will indicate the new selected split point. Release the SPLIT POINT button and play the keyboard to hear the new split.

17