![(3)Speaker connections Before Connecting](/images/new-backgrounds/12638/1263823x1.webp)
(3)Speaker connections Before Connecting
This DVD Receiver is designed to reproduce optimum sound quality when the supplied speakers are used. If you wish to connect other speakers to the system instead of the supplied speakers, they should be 6 ohms impedance with a minimum power handling of 50 watts each.
Maintain correct polarity when connecting speakers (colored wire for positive and black wire for negative). To prevent damage to circuits, never
Connection
The above connections can be expressed by the below table:
SPEAKERS FRONT LEFT | FRONT RIGHT | CENTER | SURROUND | SURROUND | PASSIVE | ||||||||||||||
LEFT (REAR) | RIGHT (REAR) | SUBWOOFER | |||||||||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
Unit | L+ |
| L - | R+ |
| R - | C+ |
| C - | SL+ |
| SL - | SR+ |
| SR - | + |
| - | |
|
|
|
|
|
| ||||||||||||||
Terminals |
|
|
|
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Use Wires | White |
| Black | Red |
| Black | Green |
| Black | Blue |
| Black | Grey |
| Black | Purple |
| Black | |
Speakers | White |
| Black | Red |
| Black | Green |
| Black | Blue |
| Black | Grey |
| Black | Purple |
| Black | |
Terminals |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: always connect colored wire to colored speaker terminal (+).
always connect black wire to black speaker terminal
Press the button down & insert the wire, then release the button. | Notes |
| • Do not remove |
| excessive amount of |
| insulation on the wire |
| cords, to avoid the |
| stripped portion from |
| touching each other. The |
| optimal length for the |
| stripped part should be |
| around 1/3 inch (or |
| 1cm). |
| • Do not push the |
| stripped part too far |
| into the speaker |
| connectors. |
Connection of all speakers are the same.
E
E 11