Kramer Electronics C-AFDM System Requirements for Setup Hardware, Optical All-Fiber DVI Cable

Overview

Figure 1: Optical All-Fiber DVI Cable

3.1System Requirements for Setup (Hardware)

You must have a DVI graphic source or card that:

￿￿Has a DVI port (for example, in your PC, SUN or Mac system) supporting a DVI-D signal

￿￿Supports the maximum graphic resolution of the display that you want to connect

There are no special requirements regarding:

￿￿The memory size, CPU speed and chipsets, if the DVI graphic controller or card is properly installed

￿￿Software, if the DVI graphic controller or card is properly installed in your Operating System

Note: The transmitter module of the Kramer Optical All-Fiber DVI Cable is designed to use +5V internal power supplied through a DVI pin (#14) from the graphic card. While the transmitter module may receive power from pin 14, it also has the option of being powered via an external 5V power adapter. The receiver, however, requires an external +5V AC/DC power adapter.

3