Kramer Electronics fc-42 user manual Menu Item, Submenu, Select

∙ and  to increase or decrease numerical values or select from several definitions of a setup

The converter automatically converts the input signal according to the setup loaded from the menu. The setup is defined via the menu. To operate the converter, press the MENU button to enter the menu, and load the desired setup (from 1 to 16). The following table defines the menu items.

	#		Menu Item		Submenu		Select		Notes
1		LOAD … SETUP				From 1 to 16		Refers to the setup
2		SAVE SETTING AS				From 1 to 16		number (from 1 to 16)
3		SET … STANDARD				AUTO, FORCED
		SELECT MODE
4		SET … STANDARD				720p/59, 720p/50,
						1080i/60, 1080i/59,
						1080i/50,
						1080p/30, 1080p/29,
						1080p/25, 1080p/24,
						1080p/23,
						1080sf/30, 1080sf/29,
						1080sf/25, 1080sf/24,
						1080sf/23
5		SET … SYNC TYPE				BILEVEL, TRILEVEL
6		SET … IMAGE TUNING		1 FACTORY RESET				Sets all the image
		(enter submenu)						tuning parameters to
								zero
				2 BLACK		From -32 to 31
				3 Y-GAIN		From -64% to 63%
				4 GAIN		From -64% to 63%
				5 COLOR		From -64% to 63%
				6 B-Y		From -64% to 63%
				7 R-Y		From -64% to 63%
				8 SHARPNESS		From 0 to 155%		In 5% steps
7		SET … Test signal		NO TEST SIGNAL
				1 COLOR BARS 100%
				2 Y-SWEEP 30MHZ
				3 PULSE 2T AND BAR
				4 Y RAMP
				5 C-SWEEP 15MHZ
				6 SPLIT BARS
				7 GRID
				8 GRID INVERSE
8		SET … Free run mode				BLACK SCREEN, BLUE
						SCREEN
9		SET … Address of				First, Second
		machine

12 FC-42 - Using the FC-42 Component To HD-SDI Converter