Kramer Electronics RC-2C RC-2Rear Panel, Features and Functions of the RC-2, Gnd Pin, +12V PIN

Your RC-2C/RC-2

Figure 3 and Table 2 define the RC-2rear panel:

Figure 3: RC-2 Rear Panel

Table 2: Features and Functions of the RC-2

#	Feature	Function
1	RC-2 Front Panel	Front panel, including two control buttons
2	PROGRAM ENABLE Switch	For technical support use only
3	GND PIN	Connects (-) to the Ground
	+12V PIN	Connects (+) to the connector for powering the unit
4	RS-232Terminal Block	Connect to the RS-232 connector on the A/V equipment or a PC
	Connector	or other Serial Controller, see Section 4.1

5