Kramer Electronics user manual The RS-232PINOUT, Connecting the IR-OUTfor the RC-2COnly

Your RC-2C/RC-2

4.1 The RS-232 PINOUT

The RS-232 9-pin D-sub port PINOUT is defined in Figure 4 and Table 3:

RS-232 PINOUT

9

8

5

4

GND

7 3

6 2

1

Rx Tx

Figure 4: RS-232 PINOUT Connection

Table 3: RS-232 PINOUT Connection

Connect this PIN on the	To this PIN on the
Terminal Block Connector:	9-pin D-sub Connector
Tx	PIN 2
Rx	PIN 3
GND	PIN 5

4.2 Connecting the IR-OUT (for the RC-2C Only)

Figure 5 shows how to connect the IR emitter1. The white striped side connects to IR OUT, the black side connects to the Ground, and the LED Emitter Shell is affixed to the IR sensor window with the adhesive layer.

Figure 5: IR Emitter Wiring

1 Using the Kramer 3.5mm to IR Emitter Control Cable (C-A35/IRE-10)

6 KRAMER: SIMPLE CREATIVE TECHNOLOGY