Kramer Electronics SV-552 PART III Detailed Installation Instructions , 5 Connecting the SV-552 SummitView Processor/ Switcher

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the SV-552 SummitView™ Processor/ Switcher
10
this information exchange is essential for proper VGA OUT operation. Using
the Kramer Pico TOOLS™ FC-200 EDID Copier, you can copy the EDID
information from your display and upload it to the SV-301xl wall plate,
ensuring trouble-free operation of the system with any PC or Laptop.
When used in conjunction with the SV-301 and the SV-306, t he SV-552
Processor/Switcher provides EDID PassThru. When used in conjunction with
the SV-306, the SV-552 Processor/Switcher also provides HDCP support.
PART III Detailed Installation Instructions
PART III covers connecting the SV-552, installing the Wall Plates and the Room
Controller
We recommend that after deciding where you want to install the screen and
the projector, you install in this order, the:
1. Cables and wires (see Section 5.1
2. Room controller (see ). Section 5) and wall plates (see 7Section
5 Connecting the SV-552 SummitView™ Processor/
Switcher
).
This section describes:
• Connecting the SV-552 (see Section 5.1
• Operating the SV-552 Remotely (see ) Section 5.2
• Installing the SV-552 in a 19” rack (see ) Section 5.2
5.1 Connecting the SV-552 Processor/Switcher
)
The example in Figure 3 shows how to connect t he SV-552.