Kramer Electronics TP-133 user manual 6Adjusting RGB and Compensation on the TP-134

6Adjusting RGB and Compensation on the TP-134

The skew and equalization can be set either manually or automatically.

After connecting the TP-133/TP-134to the power adapters (assuming that the twisted pair link is working), the LINK and POWER LEDs on the front of the TP-134light green.

Note: During any setup, the process times-out after 10 seconds and the device returns to normal operation.

6.1Setting the Skew and Equalization Manually

The color and equalization can be set either with the live signal or using the built- in pattern generator.

6.1.1Setting the Skew and Equalization Manually (Using a Live Signal)

To set the color and equalization using a live signal:

1.Press the COLOR button briefly. The RED LED flashes red.

2.To change the red gain, press the + or – button to increase or decrease the gain respectively.

3.To move to the green setting, press and hold the COLOR button for three seconds.

The GREEN LED flashes green.

4.To change the green gain, press the + or – button to increase or decrease the gain respectively.

5.To move to the blue setting, press and hold the COLOR button for three seconds.

The BLUE LED flashes blue.

10 TP-133/TP-134 - Adjusting RGB and Compensation on the TP-134