Kramer Electronics TP-133 user manual Blue LED

Figure 2: TP-134 Automatic PC/Audio/Data Line Transmitter Front and Rear Panels

	Feature	Function
1	RS-2329-pin D-sub	Connect to the controlled RS-232 device (monitor)
	Connector (M)
2	COLOR / + Button	Press to enter the setting mode (see Section 6).
		Press and hold together with the SELECT button to trigger the auto-
		adjust function
3	SELECT / – Button	Press to select the setting to change (see Section 6).
		Press and hold together with the COLOR button to trigger the auto-
		adjust function
4	BLUE LED	Flashes to indicate that the blue color setting is selected
5	LINK / GREEN LED	•	Lights orange to indicate that the TP link is established
		•	Flashes orange to indicate that there is a link problem
		•	Flashes green to indicate that the green color is selected
6	POWER / RED LED	•	Lights green to indicate that the device is receiving power
		•	Flashes red to indicate that the red color is selected
		•	Flashes red together with the GREEN LED flashing green) to
			indicate that the equalization setting is selected
7	5.3V DC Power	Connect to one of the supplied +5.3V DC power adapters. Center
	Connector	pin positive
8	BAL. AUDIO OUT 5-pin	Connect to a balanced, stereo audio acceptor (see Section 5.1)
	Terminal Block
9	AUDIO OUT 3.5mm Mini	Connect to an unbalanced, stereo audio acceptor
	Jack
10	LINE IN RJ-45 Connector	Connect to the LINE OUT RJ-45 connector on the TP-133(see
		Section 5.2)
11	PC VIDEO OUT 15-pin	Connect to a computer graphics video acceptor
	HD Connector (F)

6 TP-133/TP-134 - Defining the TP-133/TP-134 Line Transmitter and Receiver