4 | Connecting the VA-10 |
| i | Always switch off the power to each device before connecting it to your |
| VA-10. After connecting your VA-10, connect its power and then |
switch on the power to each device.
To connect the VA-10(as the example in Figure 2 illustrates), do the following:
1.Connect a computer graphics source to the XGA INPUT of a PT-110XGA Line Transmitter and connect the LINE OUTPUT on the PT-110to the LINE IN RJ-45 connector on a TP-120XGA Line Receiver unit. Connect the XGA OUT connector on the TP-120unit to the 15-pin HD (F) INPUT connector on
the VA-10.
Refer to the PT-110, WP-110, TP-120user manuals that can be downloaded at http://www.kramerelectronics.com.
2.Connect the 15-pin HD (F) OUTPUT connector on the VA-10, to the RGB acceptor (for example, a projector).
3.On each of the VA-10, TP-120and PT-110, connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity.
4.Use the BLUE, RED and GREEN trimmers to adjust the blue, red and green color delays, as required.
VA-10 - Connecting the VA-10 | 5 |
