Kramer Electronics VM-1110xl - page 10

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting Your VM-1110xl
8
6.2 Connecting a 2x1:5 Mono DA
To connect
1
the VM-1110xl as a 2x1:5 mono DA, as the example in Figure
3 illustrates, do the following:
1. Connect mono audio source A (for example, a mono audio player) to
INPUT A on the rear panel.
2. Connect mono audio source B (for example, a mono audio player) to
INPUT B on the rear panel.
3. Connect up to 10 audio acceptors
2
to the OUT connectors on the rear
panel. The A INPUT feeds to the A OUT connectors and the B INPUT
feeds to the B OUT connectors.
4. On the front panel, press IN the 1:10 / 2x1:5 button.
5. Connect the power cord to the electricity supply.
6. Switch on the VM-1110xl.
The audio input is distributed to the audio outputs.
Figure 3: Connecting the VM-1110xl as a 2x1:5 Mono DA
1 Switch OFF the power on each device before connecting it to your VM-1110xl. After connecting your VM-1110xl, switch on
its power and then switch on the power on each device
2 Not all outputs have to be connected