Connecting Your Balanced Stereo Audio Distributor
I:D c | D CQCB n da |
To configure a 2x1:10 mono DA, as illustrated in Figure 3, do the following:
1.Connect mono audio source (for example, a mono audio player A) to LEFT INPUT A.
2.Connect up to 10 mono audio acceptors (for example, mono audio recorders 1A to 10A) to any of the LEFT OUTPUT connectors.
3.Connect mono audio source (for example, a mono audio player B) to RIGHT INPUT A.
4.Connect up to 10 mono audio acceptors (for example, mono audio recorders 1B to 10B) to any of the RIGHT OUTPUT connectors.
5.Release the LEFT and RIGHT selector buttons 1:10/2x1:5 to select 1:10.
6.Connect the power cord to the electricity supply.
7.Switch on the oe7??A:.
The audio input(s) is/are distributed to the audio outputs.
Figure 3: 2x1:10 Mono DA Configuration
8 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |