Connecting Your Balanced Stereo Audio Distributor
I:F c | CQCB u | da |
To configure a 1:20 stereo DA, as illustrated in Figure 4, do the following:
1.Connect a stereo audio source (for example, a stereo audio player) to LEFT INPUT A and RIGHT INPUT A.
2.Connect up to 10 stereo audio acceptors (for example, stereo audio recorders 1 to 10) to the LEFT and RIGHT channels of any of the OUTPUT connectors.
3.Release the LEFT and RIGHT selector buttons 1:10/2x1:5 to select 1:10.
4.Connect the power cord to the electricity supply.
5.Switch on the oe7??A:.
The audio input(s) is/are distributed to the audio outputs.
Figure 4: 1:10 Stereo DA Configuration
9
