Kramer Electronics VM-1120 user manual Xn8CCDB, Using the Selector Button

Setting the VM-1120

M u xn8CCDB

Figure 6 illustrates how the selector button works when two inputs are connected to one channel.

Figure 6: Using the Selector Button

Note the following when using the oe7??A::

￿The left and right channels are not connected. Left inputs only distribute to left outputs and right inputs only distribute to right outputs

￿Only the “A” input can distribute to 10 outputs. The “B” input only distributes to the 5 “B” outputs

If necessary, adjust the volume on the outputs by turning the LEVEL A and B potentiometers using a small screwdriver.

11