Connecting the VP-419 Video To SXGA/HD Scaler

5 Connecting the VP-419 Video To SXGA/HD Scaler

Connect your VP-419, as the example in Figure 2 illustrates1:

1.Connect an s-Video source (for example, an s-Video camcorder) to the s-VIDEO INPUT 4p connector.

2.Connect a composite video source (for example, a composite video player) to the VIDEO INPUT RCA connector.

3.Connect a component video source (for example, a DVD player) to the Y, Cb and Cr INPUT RCA connectors.

4.Connect a VGA graphics source to the PC IN INPUT HD15 connector2.

5.Connect the RGB / YPbPr OUTPUT HD15 connector to a video acceptor (for example, a plasma display)

6.Connect the 5V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in this illustration).

Composite

Video Player

Plasma

Display

s-Video	DVD Player
Camcorder

Computer Graphics

Source

Figure 2: Connecting the VP-419 Video To SXGA/HD Scaler

1 You do not have to connect all the inputs, connect only those that are required

2 This PC input signal is not scaled, but is available for pass-through when the PC Source is selected

4	KRAMER: SIMPLE CREATIVE TECHNOLOGY