Kramer Electronics user manual Your VP-419 Video to SXGA/HD Scaler

Your VP-419 Video to SXGA/HD Scaler

Video inputs are de-interlaced and scaled to the selected PC or HDTV resolutions, as follows:

￿￿	VGA (640x480)	￿￿	SXGA (1280x1024)	￿￿	720p
￿￿	SVGA (800x600)	￿￿	480p	￿￿	1080i
￿￿	XGA (1024x768)	￿￿	576p

The VP-419Video To SXGA/HD Scaler also features:

￿￿Automatic detection of NTSC, PAL-B, PAL-G, PAL-I, and PAL-D video standards

￿￿On-Screen Display (OSD) for easy setup and adjustment

￿￿A high-performance adaptive 3D comb filter (for precise color management)

￿￿Per-pixel motion compensated de-interlacing for artifact-free video images

￿￿Automatic detection for 3:2 pulldown for 24fps film source material

￿￿Frame rate conversion of 50Hz to 60Hz for PAL input signals

￿￿A Vertical Temporal (VT) Filter for removing jagged artifacts

￿￿A built-in DCTI/DLTI circuit for color/luminance transient improvement

￿￿A PC Input connector for easy integration into an existing system

￿￿A non-volatile memory that retains the last settings used

Control your VP-419:

￿￿Directly, via the front panel push buttons

￿￿Remotely, from the infra-red remote control transmitter

To achieve the best performance:

￿￿Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise- levels (often associated with low quality cables)

￿￿Avoid interference from neighboring electrical appliances and position your Kramer VP-419away from moisture, excessive sunlight and dust

4 Your VP-419 Video to SXGA/HD Scaler

Figure 1, Table 1 and Table 2 define the VP-419Video To SXGA/HD Scaler:

2 KRAMER: SIMPLE CREATIVE TECHNOLOGY