VP-501N - Operating the VP-501N UXGA Scan Converter
9
9
You can operate your VP-501N via the front panel buttons that function as:
User-friendly front panel buttons for easy control of ProcAmp functions,
flicker-reduction, image optimization, one-touch freezing, over-scanning and
under-scanning
Menu buttons: MENU, ENTER, – and +; or
Quick-set buttons: FREEZE and OS/US (dual-purpose buttons)
This section describes how to:
Use the quick-set buttons (see Section 5.1)
Use the set of menu buttons (see Section 5.2)
Use the Menu screen (see Section 5.3)
Use the test patterns (see Section 5.4)
Save and recall (see Section 5.5)
Set the DIP-switches (see Section 5.6)
5.1 Using the Quick-Set Buttons
The following sub-sections describe the VP-501N quick set buttons.
5.1.1 Using the FREEZE Button
Press the FREEZE button to freeze the picture on the screen. The frozen picture is
displayed regardless of the signal on the input to the unit. This lets you, for
example, change the programs on the PC, and set up the next image.
By pressing the FREEZE button again, the frozen image will be replaced by the
most current image on the input to the unit.