Kramer Electronics VP-501N 5.6 Setting the DIP-Switches

VP-501N - Operating the VP-501N UXGA Scan Converter

 Setup 1 is recalled

 The unit is disconnected

 The unit is reconnected

 Setup 2 appears (since it was saved last)

Whenever a change to the setup is made, you are prompted to save the changes

(the Save Setting item does not timeout, it remains until No or Yes is selected), be

it recalling a different setup, or changing the Zoom mode:

 Select No to cancel setup changes

 Select Yes to save setup changes

Changes are saved to the setup number currently appearing next to the

Save item (note that your setup will be saved to one of the four setups and

overwrites the previous setup associated with this setup number)

To recall a setup select Recall from the advanced menu and select the setup

number you want to recall.

5.6 Setting the DIP-Switches

Figure 6 describes the factory default DIP-switches setting for the VP-501N:

Figure 6: VP-501N DIP-Switches

DIP

Function

Description

PAL/NTSC

Determines the video standard to be used:

to select PAL, set to OFF (up)

to select NTSC, set to ON (down)

YUV/RGB

Determines the input color space to be used:

to select YUV, set to OFF (up)

to select RGB, set to ON (down)