AT&T 955 user manual SET UP System Features, Convenience Ports

INSTALLATION

Convenience Ports

If you want to connect another device (such as a modem or fax machine) to the wall jack, you can use the jacks on the phone labeled AUX. These convenience ports use Lines 3 and 4; a call picked up on Line 3 or 4 at another extension may interrupt a fax, modem, or message transmission.

SET UP SYSTEM FEATURES

Use the Navigation buttons to program or change the system features setup.

Store your
selection and	Scroll through
move to next	options

•Four One-Line Jacks

Modular

Telephone

Jacks

Lines 3 and

4with Two-line Adapter

Modular Telephone Jacks Lines 1 and 2 with Two-line Adapter

Standard

Electrical

Outlet

feature
Enter	Confirm
Programming
	option choice
mode
	Used when
	resetting
	features to
Exit Programming	default settings
mode

Power Cord

Telephone Jack Aux L4
	Telephone Jack L1/L2
Telephone Jack Aux L3	Telephone Jack L3/L4

•Press Gto enter the Programming mode. The screen displays:

NOTE: If you do not press a key to continue programming within 20 seconds, the system automatically exits the Programming mode.

•Two Two-Line Jacks

Modular

Telephone Jack

Lines 3 and 4

Modular

Telephone Jack

Lines 1 and 2

Standard

Electrical

Outlet

•Press -or +repeatedly to move through the list of options.

•Press >to choose the option currently displayed.

•Press Sto store your selections and return to the ‘home screen’ for the feature currently displayed.

Feature

Options

Power Cord

Telephone Jack Aux L4	Telephone Jack L1/L2
Telephone Jack Aux L3	Telephone Jack L3/L4

You can set up one feature at a time or you can set up a feature and then move on to set up another feature. After you change one feature, press

+or -to select another feature. When you are finished with features setup, press Eto exit Programming mode.

NOTE: After a feature is successfully programmed, the system beeps once. If the system beeps twice, repeat the steps to set up the feature.

14 15