
SPEED DIAL OPERATION
6Press the SPD button where you wish to store this entry. A confirmation tone sounds and the screen displays:
DIRECTORY OPERATION
Reviewing Information Stored in a Speed Dial Location
Press the SPD button for the location you wish to review. The screen displays any information stored in that location.
Editing Information Stored in a Speed Dial Location
1Press the SPD button for the location you wish to review.
2Press t, then use <, >and the dial keypad to edit the name.
3Press Sto save the name and move on to edit the phone number.
4Press the SPD button for the location where you wish to save this entry. The screen displays your new entry and Saved!.
Making a Speed Dial Call
1Press the SPD button for the number you wish to call.
2When the entry is displayed on the screen, press oto place the call (the line is selected automatically)
— OR —
Press the LINE button you wish to select, then press oto place the call.
Removing Information from a Speed Dial Location
1Press the SPD button for the number you wish to remove.
2Press R. The screen prompts REMOVE: remove?.
3Press Ragain within three seconds to remove the entry. The screen displays:
Store names and numbers in the directory
Can also be used to store the switchhook flash needed to activate some custom calling services
Enter
Directory
mode
Edit directory |
entries |
Scroll through |
directory |
entries |
Remove a |
directory entry |
Dial a |
number from |
the directory |
Enter characters of directory entries
Store a pause in a directory number
Store a tone signal in a directory number
32 | 33 |