AT&T 955 user manual Call Waiting, Calls Received on Two or More Lines Simultaneously

CALLER ID OPERATION

Call Waiting

If you subscribe to Caller ID with Call Waiting service and you receive a Call Waiting call, the screen will display call information for the call.

1Press Fto access the Call Waiting call.

2To switch back to the original call, press Fagain.

Calls Received on Two or More Lines Simultaneously

Your screen can display the Caller ID information for only one call at a time, but you can switch between the information for two or more ringing lines by pressing C.

For example, if Line 3 of the phone is ringing, the screen displays the Caller ID information for Line 3:

If the phone begins to ring on Line 1, the screen will display the new caller’s information after it is received:

CALLER ID OPERATION

Press Cto review the Caller ID information for the first call and the screen displays:

Pressing Crepeatedly will allow you to go back and forth between the general screen display

and the Caller ID screens for each of the ringing lines.

Message Waiting and NEW CALL Light

This light stays on steadily when you have received call information but have not yet reviewed it. If you subscribe to a voice mail service, this light flashes when you have unretrieved messages waiting. The screen also displays information about the number of new calls and voice mail messages waiting.

CID=100/198		100 new Caller ID messages, and 198 total Caller ID
		messages
COVM		Voice mail “message-waiting”information on Lines 1, 3, and 4
1	34

46 47