SET UP SYSTEM FEATURES
Turn Hold Reminder On or Off
1Press G.
2Press
3Press
4Press Sto store your selection.
Program Home and Local Area Codes
One Home and up to five Local Area Codes can be programmed into the unit. The Home Area Code must be programmed in order for you to dial numbers stored in the directory and the Caller ID Call List and so that you can transfer numbers from the Call List to the directory. By programming these specific area codes, the unit will be able to distinguish a local call from a long distance call, and will thereby dial the appropriate number of digits.
1Press G.
2Press
3Press
4Press >to confirm your choice, then use the keypad to enter the digits of the area code.
5Press Sto store the setting.
6Repeat Steps
NOTE: If you must dial the area code to place calls within your own area code, enter “000” for the Home Area Code and enter your area code as a Local Area Code.
You will need to program the following two features if this phone is the designated Console Phone for your Centrex system:
Set Your Phone to be the Centrex Console Phone
NOTE: This feature is for use with Centrex systems only.
1Press G.
2Press
3Press
4Press Sto confirm your selection.
SET UP SYSTEM FEATURES
Program the Centrex Console Delayed Ring Time
NOTE: This feature is for use with Centrex systems only.
Set the length of time the phone will ring before the Centrex Console phone picks up calls to your phone. One ring is about six seconds.
1Press G.
2Press
3Press
4Press Sto confirm your selection.
Erase All Settings and Return the Phone to Default Settings
1Press G.
2Press
3Press >. The screen displays:
4Press Rwithin three seconds to confirm the RESET ALL command. The screen displays:
20 | 21 |
